INSPECTION OF MODERN BUILT-IN DEVICES FOR CONTROL AXLEBOX UNIT OF PASSENGER WAGONS FOR HIGH-SPEED TRAFFIC
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 173, Issue 7
Abstract
The article defines the criteria for which it is necessary to evaluate and select the built-in monitoring tools. The review of modern built-in devices for monitoring the technical condition of the passenger compartment of the passenger car for high-speed traffic has been performed. The systems of control of the bookshops of domestic and foreign countries, as well as leading manufacturers of axle boxes for railway transport are considered. The main purpose of the new technology is to identify in the passing trains of safety-related malfunctions, take measures to immediately stop all available means, prevent further tracing of faulty cars with eliminating defects or disconnecting them from trains. The measures are proposed to improve the domestic integrated control system of the boxes. The article proposes the implementation of an automated system for monitoring the heating of the axle boxes, a diagnostic analysis of the technical condition of the axle boxes. The built-in control systems of the boxes most adapted for operation in the conditions of the Ukrainian railways are offered.
Authors and Affiliations
Vadim Petukhov, Nadiia Kladko, Ilona Regent
Keywords
Related Articles
- EP ID EP321998
- DOI 10.18664/1994-7852.173.2017.118200
- Views 71
- Downloads 0
DEVELOPMENT OF RECYCLING TECHNOLOGY FOR RELAXED SURFACES OF MOBILE COMPONENTS
In the process of studying the ways of restoring the worn surfaces of cast-iron parts of the rolling stock, it is established that the known methods of recovery do not provide the required workability. It is proposed to...
FORECASTING PARAMETERS OF SOLID-FUEL BOILERS FOR HEATING THE DIESEL LABORATORY
In the paper, on the basis of the developed model, calculations of the parameters of the solid fuel boiler for heating the premises of the diesel laboratory were performed. The results of the calculations were verified a...
FORMATION OF THE METHOD FOR SELECTION OF VEHICLES LOAD CAPACITY TO WORK WITH SCHEMES OF CONVEYING UNITIZED CARGO
The article is devoted to the research of the method for selection of vehicles load capacity to work with schemes of conveying unitized cargo. The first stage was to carry out simulation of conveying unitized cargo at di...
FEATURES OF THE REMOTE IDENTIFICATION OF THE VEHICLE IN THE LIFE CYCLE OF INFORMATION SECURITY UNDER ITS
The article presents the results of the study information system for monitoring the technical condition of vehicles in operation parameters. To perform remote monitoring of technical condition parameters and diagnosing t...
CALCULATION OF THE CRACK RESISTANCE OF REINFORCED CONCRETE ELEMENTS WITH ALLOWANCE FOR THE LEVELS OF NORMAL CRACKS FORMATION
The importance of the step formation of cracks in reinforced concrete elements for the modern theory of concrete and reinforced concrete is substantiated. The separate experimental investigations results and the major dr...