INSTANTANEOUS AND INTEGRAL POWER EQUATIONS OF NONSINUSOIDAL 3-PHASE PROCESSES
Journal Title: Електротехніка і Електромеханіка - Year 2016, Vol 0, Issue 1
Abstract
Purpose. To identify the mathematical relationship between the instantaneous powers (classical and vectorial) and integral powers in non-sinusoidal mode and to get complex form of instantaneous powers in 3-phase 4-wire power supply in terms of the spectral approach. Methodology. We have applied the vector approach with one voice allows you to analyze the energy characteristics of 3-phase power supply circuits (for 4-wire and 3-wire circuits) in sinusoidal and non–sinusoidal mode, both the time domain and frequency domain. We have used 3-dimensional representation of the energy waveforms with the complex multi-dimensional Fourier series. Results. For 4-wire network with a non-sinusoidal (regardless of their symmetry) processes, we have developed the mathematical model one-dimensional representations of the complex form for the active (scalar) instantaneous power (IP) and 3-dimensional form (inactive) vectorial IP. It is possible to obtain two dual integral power equations for complex scalar and vector integrated power of non-sinusoidal modes. The power equations generalize generalizes the equations of sinusoidal modes for 4-wire network. Originality. In addition to the classification of energy local regimes in the time domain for the first time we spent the classification of non-sinusoidal modes in the spectral region and showed the value and importance of the classification of regimes based on the instantaneous powers. Practical value. The practical value the obtained equations is the possibility of their use for improving the quality of electricity supply and the quality electricity consumption.
Authors and Affiliations
Iu. A. Sirotin, T. S. Ierusalimova
Keywords
Related Articles
- EP ID EP290361
- DOI 10.20998/2074-272X.2016.1.13
- Views 113
- Downloads 0
MATHEMATICAL MODELING OF ELECTROMECHANICAL PROCESSES IN A BRUSHLESS DC MOTOR
On the basis of initial assumptions, a mathematical model that describes electromechanical processes in a brushless DC electric motor with a salient-pole stator and permanent-magnet excitation is created.
AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
Purpose. To obtain new calculation correlations, determining approximate energy dissipation and electric erosion of massive basic metallic electrodes in the high-voltage high-current air switchboard (HVCAS) of atmospheri...
INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
Purpose. Investigation of the influence of the intensity of cooling of active elements and the period of succession of power pulses on the thermal processes of linear pulse-induction electromechanical converter (LPIEC) o...
RESULTS OF TESTS OF LIGHTNING-RODS WITH UNIVERSAL CLAMPS BY THE APERIODIC IMPULSES OF CURRENT OF ARTIFICIAL LIGHTNING WITH THE PEAK-TEMPORAL PARAMETERS RATIONED ON FOREIGN STANDARDS
Purpose. Test in obedience to the requirements of row of operating foreign standards of round metallic lightning-rods with the flat metallic universal clamps of the special type on firmness to direct action of аperiodic...
AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
Introduction. One of the promising directions of electromagnetic forming (EMF) is a contactless magnetic-pulse straightening of the automobile bodies. The efficiency and the quality of the straightening depend on design...