Integrated Circuits Tester Design for Logic Circuit Laboratories
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2019, Vol 7, Issue 1
Abstract
Logic circuit laboratory is one of the important laboratories for Electrical-Electronics Engineering department. The Integrated Circuits (ICs) must work correctly during the experiments. It is difficult and time-consuming to set up a circuit to test whether the ICs are working correctly or not. In this work, the ICs tester was designed to test the ICs quickly and correctly. In the ICs tester, the PIC18F452 microcontroller produced by Microchip was used to perform the control and test algorithms. The PIC18F452 has low power consumption, high performance and improved FLASH/EEPROM technology. Using ICs tester is easy and simple. It is enough to just insert ICs into the zif-socket. The tester shows on the LCD screen whether the ICs are working correctly or not. The prototype of the ICs tester was produced and used in the logic circuit laboratory. Experiments and comments from laboratory personnel show that the ICs tester can be used safely in laboratories.
Authors and Affiliations
Salim ÇINAR
Keywords
Related Articles
- EP ID EP491406
- DOI 10.29109/gujsc.449163
- Views 102
- Downloads 0
Investigation of Steel Fiber Usability in Concrete Traverse Produced by Limestone Aggregate
In this study, with the limestone aggregate concrete sleeper steel fiber produced was researched. Working with limestone aggregates, the maximum aggregate particle size and the amount of steel fiber volume to be replaced...
Implant Surface Micro-fabrication and Characterization in Q-Switched Mode with ytterium-doped Fiber Laser
Surface morphologies of titanium implants has crucial importance for long-term stability which following their placement. Different techniques of surface modifications were adopted to increase bone–implant interface. Tod...
Effect of External Insulation on Drying Time and Energy Consumption in Food Drying Oven
In the experimental study, the effect of glasswool and stone wool insulation on energy consumption and drying time in FDO, which was previously designed and manufactured by microcontroller, was investigated. The apple wa...
Prediction of Dielectric Properties of Polypropylene/Polyaniline Composite Films By Artificial Neural Networks Model
In this study, the change of the frequency dependence of the real and imaginary components of the complex dielectric function of the polypropylene (PP) polymer depending on the addition of 0.3%, 0.4%, 0.6% and 0.7% polya...
Stator Configuration for Cogging Torque Minimization of Surface Mounted Permanent Magnet Synchronous Generators
In this study, we present the structural changes in the stator core to reduce the cogging torque in a surface-mounted permanent magnet synchronous generators. The effect of these structural changes on cogging torque and...