Intelligent Speed Observing in Transportation system Using ARM 9
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 2
Abstract
Radio Frequency Identification (RFID) has attracted considerable attentions in recent years for its broad applications and complements to the current GPS navigation system when GPS signals are not available But in practice, GPS does not provide sufficient formation for navigation due to its low positioning accuracy (5 to 7 meters).Moreover, even combined with map-matching technologies, GPS still cannot achieve lane level positioning and cannot provide information regarding the traffic direction in the current lane. In this paper we conclude ARM based LPC2148, S3C2440A, PIC18F452, RF434, ZIGBEE, RFID READER. The proposed system contains mainly four nodes vehicle unit, two reader units, central unit. Vehicle unit is implemented on ARM7, Central unit onARM9. The reader Units is placed in a distance of 50-100 metes to each. When a vehicle crosses first reader unit the tag attached to vehicle read by the reader unit and it starts timer send intimation to central station , when the vehicle reaches the second Reader unit there also the Tag is read by reader unit and it also send the intimation and time details to central station. By taking these details the central station calculates the speed of the vehicle and also detects the location of vehicle based on reader’s position and sends this information to Vehicle. If the vehicle is going with high speed than predefined then the speed control unit slowly reduce the vehicle speed. The central unit also provides the next location information to vehicle so that he can decide the route that he wants to go. The communication between Vehicle unit and Central unit is using Zig- Bee whereas the communication between reader units and Central unit is using RF434 wireless module.
Authors and Affiliations
Nalluri Veda Kumar, G. V. R. L. Maccalay
Keywords
Related Articles
- EP ID EP19615
- DOI -
- Views 287
- Downloads 4
Design and Implementation of a Dual Axis Solar Tracking System
Population of the world is getting increased rapidly day by day and the demand for energy is increasing appropriately. During the recent decades, the main sources of energy such as the Oil and coal are expected to end u...
Drying of Chili Using Solar Cabinet Dryer & Analysis with Results of Various Parameters
Solar Energy will going to be 5th generation main energy sources with its easy availability and scarcity of nonrenewable energy sources. With increasing demand of energy sources to harness our daily needs and scarcity of...
A Survey on the Use of 3D Password in Security
Passwords play an important role in various computing applications like ATM machines, internet services, windows login, and authentication in mobiles etc. There are many authentication techniques are available, Such as...
Mechanical Studies of Self Compacting Concrete Using Plastic Aggregate
In this present study the plastic aggregate obtained from E-waste is used as a partial replacement of coarse aggregate in self compacting concrete. An experimental investigation on the fresh, hardened characteristics of...
CFD Analysis of Vortex Tube for Various Cross Sectional Nozzles
In this article computational fluid dynamic analysis of a 3-D steady state compressible and turbulent flow has been carried out through a vortex tube. The numerical models use the standard realizable k-ε turbulence mode...