Intercritical Thermomechanical Treatments Applied to the Steel Heavy Plates
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 1
Abstract
This paperwork shows the laboratory experiments made on X60 and X65 steels with several intercritical thermomechanical treatment applications. Two variants were used: "down-up" thermomechanical treatment with heating and rolling in the intercritical range and "up-down" thermomechanical treatment with preliminary complete austenitizing and rolling in the intercritic interval. High values of the strength characteristics and a good plasticity were obtained. A comparison was made with the obtained results of the classical thermal treatment application (normalizing).
Authors and Affiliations
Elisabeta VASILESCU
Analysis Frequencies of a Vibration-Type Structure Hall
Its main purpose was to identify natural vibration frequencies for a warehouse type structure in order to avoid resonance phenomena of the structure. The analysis is performed using the finite element analysis module of...
Characterization of Thick Hard Layers with Ni-Cr-B-Fe-Al Alloy Obtained by Laser Cladding
To increase the resistance to wear and corrosion of the surface layers made from steel with 0.45% C, multilayer deposition was tested by injection of powder with chemical composition of 8.9% Cr, 4.5% Fe, 5.1% B, 2, 4% Al...
Experimental Model for Pollutants Monitoring into the Coke-Chemical Plant
The Coke-Chemical plants contribute heavily to producing and emitting in the atmosphere a big amount of polluting agents. Polluting emissions diminution and situating them within the international specific standards, can...
Evaluated Work System and Environmental Risk for a Worker in Drilling for Methane Gas
Improving the safety and health at work is important not only in terms of human view, in order to reduce possibilities of accident to workers, but also as a way to ensure the success and durability work for a worker in d...
A Comparative Approach of Degradative Potential of Two Different Nanophotocatalysts onto a Model Textile Dye
Motivations and objectives. It is quite a difficult issue to treat, decolorize and mineralize textile dye waste containing dyes by conventional chemical methods (primary: adsorption, flocculation and secondary: chlorinat...