Interlaboratory comparisons of the calibration results of time meters
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 9
Abstract
<p>The analysis and selection of the methodology for processing the results of interlaboratory comparisons (IC) were carried out. The universal algorithm for processing the primary IC data was proposed, which allows the reference laboratory to take into account all the features of reporting on ICs.</p><p>The transmission sample for IC on the calibration of time meters was investigated. The reference values and corresponding expanded uncertainties for this IC are determined. The results of interlaboratory comparisons of calibration results of the time meter at points from 30 s to 3600 s are presented. Comparison of the results obtained during the calibration of the time meter by ten laboratories was carried out according to the radial scheme within 2016. The deviations of the results obtained by each laboratory were determined and the correctness of the results was evaluated taking into account the measurement uncertainty using the criterion for the performance statistics for the selected time intervals.</p><p>The competence of the staff of laboratories participating in IC on the calibration of time meters was estimated. An analysis of the evaluation results showed that the staff of eight out of ten laboratories, including the reference one, has a high level of competence. It has been established that, unlike other factors, the competence of the staff of laboratories participating in IC has little effect on the IC results.</p>
Authors and Affiliations
Oleh Velychko, Sergii Shevkun, Tetyana Gordiyenko
Keywords
Related Articles
- EP ID EP527794
- DOI 10.15587/1729-4061.2018.121089
- Views 73
- Downloads 0
Development of energy-saving technology to maintain the functioning of a wind-solar electrical system
<p>An integrated system to support the functioning of a wind-solar electric system has been designed, based on predicting a change in the capacity of a rechargeable battery when measuring voltage at the input to a hybrid...
Development of the technique for improving the structure of a magnetic field in the aperture of a quadrupole electromagnet with a superconducting winding
<p>It is of practical interest to construct models for a magnetic field of the quadrupole electromagnet that would make it possible to adjust the medium-integral coefficients of magnetic flux density by changing the geom...
Twostage treatment of solid waste leachates in aerated lagoons and at municipal wastewater treatment plants
<p>The two-stage technology of treatment of the leachates of the municipal solid waste (MSW) dumps in aerated lagoons and at municipal wastewater treatment plants (WWTP) has been studied. The study objective was to devel...
Identification of the state of an object under conditions of fuzzy input data
The modernization of the methods for identification of the state of objects under conditions of fuzzy input data, described by their membership functions, was performed. The selected direction of improvement of tradition...
Improvement of cavitation erosion characteristics of the centrifugal inducer stage with the inducer bush
<p>The impact of the inducer bush, which is a stator bush with longitudinal straight grooves installed over the inducer in the model centrifugal stage on its performance, was studied. A physical experiment was performed...