Investigating the Energy and Exergy Analysis in Coal Fired Power Plant
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
Increasing growth in energy demand has already made its importance in the last century. Due to the large contribution of fossil fuels to world energy, it is almost impossible to replace the fossil fuels with other energy resources in the near future. However more no of power plant are placed, where 75% of power is generated by burning coal. According to high energy cost and necessity to reduce it, optimal use of energy and energy consumption management are very important. So the research purpose is analysis of energy and exergy in coal fired plant was carried out, then the initial goals of present research are to assess the plant parameters singly and to determine and measure the coal plant with largest losses for energy and exergy. However, analyses of energy and exergy have been performed for coal plants like boiler, turbine, and condenser and pump majorly. The results reveal that the reduction in the efficiencies of energy and exergy is comparatively tiny. The symmetry among losses of the energy and the exergy for the parameters of the plant separately revealed that the peak of losses of energy (75%) take place in the condenser, so that the peak of losses of exergy (82%) take place in the boiler. So, to obtain major increase in energy efficiency, the condenser and boiler systems required to be changed, that require more techno-economic research.
Authors and Affiliations
Reza Fathollahi, Agil Fazeli
Keywords
Related Articles
- EP ID EP464004
- DOI 10.24247/ ijmperdfeb201947
- Views 60
- Downloads 0
Raw Material Captcha Security, Applied Through Zopfia Technique
In the manufacturing unit, production plays the important role. Requirement analysis, procuring materials from the third party vendors, quality checking towards the product and storage are the main integral segments, in...
The Performance of Alumina Mixed Coconut Oil in Turning of SS304 Alloy
In the present scenario there is avast stipulate for environmental friendly cutting fluids because of severe rule enforced on usage of synthetic cutting fluids prepared by organic oils which creates perilous to the healt...
Optimization of Micro Hardness of Finished Surface in Spark Assisted Abrasive Flow Machining
Finishing is the prime requirement for the better functional performance and longer life cycle of the product. A single scratch over the surface may cause the failure of the component. This required development of such a...
Characterization of Structural Properties and Harden Enhancement of Al-Cu-N by Thin Film Coating
Two series of Al-Cu-N films containing Cu were grown by DC / RF magnetron sputtering of two elemental targets in an Ar / N & sub2; Gas mixture deposited by biasing a high-speed steel substrate. The effects of Cu content...
Investigation Study on Effective Tools for Conscription of Various Industrial Applications
Improper selection of worker or supplier may lead an unpleasant impact on original equipment manufacturer. The greatest challenge for every industry is the acquisition of workers with talents and the strength of the supp...