Investigation into the Dielectric Properties of Polypyrrole Coated Fabrics Composites
Journal Title: Fibres and Textiles in Eastern Europe - Year 2019, Vol 27, Issue 5
Abstract
Flexible polypyrrole coated fabric composites with good dielectric properties were produced using pyrrole as a monomer by in-situ polymerisation on polyester fabric. Initially, the influence of the pyrrole concentration, temperature and time on the dielectric constant of the real and imaginary parts, the loss tangent, and the surface resistance of the composites were investigated. Subsequently, exterior morphologies was analysed. The results show that the pyrrole concentration, the reaction temperature and time had a significant influence on the real and imaginary parts of the dielectric constant, the loss tangent, and the surface resistance of the composites. The polypyrrole composites produced show good performance in terms of dielectric properties and electrical conductivity.In the 0-106 Hz frequency range, the values of the real and imaginary parts of the dielectric constant of the 0.8 mol/L group are both at their largest. Moreover, the value of the surface resistance of the 0.8 mol/L group is at its smallest, and the value of the surface resistance of the 0.2 mol/L group is at its largest, which is 12 times the value given by the 0.8mol/L group.Values of the real and imaginary parts of the dielectric constant, and the loss tangent for the experimental group produced by polymerisation at ambient temperature are at their largest, which is superior to the other groups. The value of the surface resistance for the experimental group produced at ambient temperature is at its smallest and the electrical conductivity is at its strongest; the higher the reaction temperature, the larger the value of the resistance. The various dielectric properties of the 150 min group are better than for the other groups.<br/><br/>
Authors and Affiliations
Chuanbing Ge, Yuanjun Liu, Xiaoming Qian
Keywords
Related Articles
- EP ID EP600872
- DOI 10.5604/01.3001.0013.2905
- Views 92
- Downloads 0
Wpływ naturalnie modyfikowanej skrobi i syntetycznej preparacji na charakterystyki przędz preparowanych
Celem pracy było zbadanie zmian właściwości przędz preparowanych preparacjami syntetycznymi i z naturalnie modyfikowanej skrobi. Proces nanoszenia preparacji przeprowadzono przy zachowaniu stałych warunków nowo zbudowane...
Porównanie metod heurystycznych i symulacyjnych zastosowanych dla rozwiązania problemu zrównoważenia linii produkcyjnych odzieży
W pracy analizowano teoretycznie ogólne informacje dotyczące linii produkcyjnych ich symulacji i równoważenia, a następnie przystąpiono do analizy konkretnego przypadku linii produkcyjnej bluzki. Równocześnie wykorzystuj...
Optimisation of Multi-Response Surface Parameters of the Roving Twist Factor and Spinning Back Zone Draft
In order to obtain the optimal collocation of two important technological parameters in the spinning process, the multi-response surface method was used to optimise the experimental results. Through the orthogonal design...
Effects of Filament Linear Density on the Comfort Related Properties of Polyester Knitted Fabrics
One of the most important developments seen in the synthetic fibre industry is absolutely producing microfibres. Microfibres provide many distinguishing properties for different end uses. In this study, the effects of fi...
Surface Roughness Assessment of Woven Fabrics Using Fringe Projection Moiré Techniques
In this paper, a new approach is proposed for characterizing the surface roughness of woven fabrics. This approach is based on the fringe projection moiré techniques and analysis of the moiré pattern, which is caused by...