Investigation of characteristic of powder wire with the CUO/Al exothermic mixture
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 92, Issue 4
Abstract
The paper the results of research is presented and the level of influence of the parameters of surfacing and the amount of exothermic mixture in the composition of self-shielding flux-cored wire on the deposition rate factor and spattering factor are analyzed. The analysis of the experiment was performed using the Taguchi method, in addition, to determine the influence of individual factors on the studied parameters (ad, ψS), analysis of variance (ANOVA) is fulfilled. It was found that for the deposition rate factor, according to the degree of influence the factors are distributed in the following order − WFS, B, CTWD, Ua, and for the spattering factor − Ua, B, CTWD, WFS. According the analysis of variance (ANOVA) of the experiment results are determined that the greatest impact on the deposition rate factor (ad) has the wire feed speed (WFS − 53.98%), the amount of exothermic mixture in the core of flux-cored wire (B − 27.3%) and contact tip to work distance (CTWD − 22.75%) have less influence, and the influence of the arc voltage (Ua) can be neglected since its contribution is only 5.82%. The arc voltage (Ua) has a high influence on the spattering factor (ψS), whose contribution is more than half (60.19%), the amount of exothermic mixture in the charge of flux-cored wire (B) has less influence, whose influence is (22.38%), while contact tip to work distance (CTWD) and wire feed speed (WFS) have minor influence and are respectively 11.55% and 5.88%. Technologically acceptable modes of surfacing are determined (contact tip to work distance CTWD = 35 mm; flux-cored wire feed speed WFS = 124 m / h; arc voltage Ua = 28V) and amount of exothermic mixture in the core of flux-cored wire, which significantly influences on the indexes of deposition rate factor and spattering factor. Models of the 2nd order of dependence on the two most significant factors for the indexes аn and ψр are constructed.
Authors and Affiliations
Bogdan Trembach, Aleksandr Grin, Sergey Zharikov
Keywords
Related Articles
- EP ID EP521705
- DOI 10.33108/visnyk_tntu2018.04.013
- Views 42
- Downloads 0
Longitudinal shear of bi-material with interfacial crack considering friction
The present paper investigates the anti-plane problem for a semi-homogeneous bi-material with the closed interface crack considering sliding friction. Solid is exposed to the combined cyclic loading in the longitudinal d...
Analysis of the waste amount in mechanical engineering and metallurgy in Ukraine
Different metallurgical industries, which are characterized by formation of a large amount of wastes have been analysed. Most of them within the meaning of useful components are competitive in raw materials and can be us...
Feasibility study of an auger conveyor performance of the haulm removing module
Nowadays, the available haulm removing machines and mechanisms do not fully meet the agronomic requirements for the process of harvesting roots. In this paper, the need to design new haulm removers and improve the availa...
Methodology for the experimental research of reinforced cylindrical shell forced oscillations
In the paper the methodology for experimental studies of forced oscillations of a horizontally oriented cylindrical shell which is reinforced from the inside by stringers and bulkheads using the servo-hydraulic test mach...
Analysis of stress intensity factors obtained with the fem for surface semielliptical cracks in the zones of structural stress concentrators
In the given article the analysis of stress intensity factors (SIF) for semielliptical surface cracks in low-alloy steel using the finite element method was conducted. The results of the distribution of stress intensity...