Investigation of Effect of Friction Stir Drilling Parameters on Elastoplastic Behaviour of Al Alloy
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The aim of the research work was to investigate on the effect of drilling parameters on ultimate tensile strength of holed specimen. The specimen tested for study to determine the UTS for both conventionally drilled hole and frictional expanded hole. The thickness of the plate, taper drill angle, lubrication rate, feed and drill speed increase the pressure and temperature of the work piece is optimized using Taguchi technique. ANOVA shows feed rate, tool rotation speed and thicknesses of plate are the most influenced parameters.
Authors and Affiliations
VISHWANATH K. C. , THIRTHA PRASADA H. P.
Keywords
Related Articles
- EP ID EP281016
- DOI 10.24247/ijmperdfeb2018126
- Views 73
- Downloads 0
Effect of Temperature and Multiwalled Carbon Nanotubes Concentration on Thermophysical Properties of Water Base Nanofluid
Nanofluids can be used as the heat transfer fluid due to itsexceptional thermal properties. The paper investigated the various thermophysical of MWCNT-water nanofluid, when dispersed in water at various temperatures and...
DETECTION OF SHIP VIBRATIONS AND ABSORPTION TECHNIQUES
Ship Vibration is a major problem which occurs frequently in the on-board vessel. Excessive ship vibration may result in fatigue failure of local structural members, malfunctioning of machineries and equipments. Ship vib...
An Experimental Investigation on Glass /CarbonFibre Hybrid Composite Material
The primary target of this work is to study the three samples of glass fibre /carbon fibre strengthened with three distinctive proportion layers with epoxy pitch. The soundness of samples tested by using non-destructive...
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Optimization of Process Parameters for Pocket Milling of Al7075 Using Response Surface Methodology
Nowadays, the high quality of surface finish is in demandto meet the market requirements. Manufacturing industry has many complex processes that vary in nature. The current paper describes the development of a model for...