Optimization of Process Parameters for Pocket Milling of Al7075 Using Response Surface Methodology
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Nowadays, the high quality of surface finish is in demandto meet the market requirements. Manufacturing industry has many complex processes that vary in nature. The current paper describes the development of a model for pocket milling on Al7075 using Response Surface Methodology (RSM). This model gives mathematical relationships in terms of Cutting speed, Feed and Step Over for Follow periphery and Zigzag tool path strategies. The Surface Roughness (SR) is predicted with these relationships and compared with the measured surface roughness of the machined components. The error observed is less than 5% between predicted and measured values.
Authors and Affiliations
M. Rajyalakshmi, Dr. P. Suresh Babu
Keywords
Related Articles
- EP ID EP655864
- DOI 10.24247/ijmperdaug201965
- Views 89
- Downloads 0
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Surface Plate: A Critical Review
This is a review paper on surface plate. In which we will go learn about different procedures and rule engaged with the surface plate. These sorts and what are the different material utilized in making surface plate. We...
The Mathematical Modelling and Performance Evaluation of Paint Manufacturing System using Fuzzy Reliability Approach
In the present paper, we present a novel method for performance evaluation of a paint manufacturing plant in which five subsystems are connected in series configuration. The mathematical modelling of the system is carrie...
The Experimental Study on the Machining Conditions of Heat Treated Medium Carbon Steel using Ceramic Cutting Tool
The current study shows the effect of various heat treatments on the cutting force and surface finishing of machining for medium carbon steel (0.522C) with different cutting conditions have been investigated. In this res...
Comparing the Effect of Heat Treatment and Plasma-Nitriding on Corrosion Resistance of Ni-B-CNT Electroless Coating with Different CNT Concentration on Aisi 4340 Steel
The aims of the work to study the resistance of corrosion and the hardness of plasma-nitrating and heat treatment of coatings with electroless Ni-B-CNT. Various concentration of CNT range, (0, 0.35 and 0.7)g/L in Ni-B-CN...