Investigation of force factors and stresses at singular points of plate elements in special cranes
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 7
Abstract
The work addresses studying the possibilities of a numerical-analytical variant of the boundary elements method (BEM) in determining the internal force factors and stresses at singular points when bending thin isotropic plates. The simplest type of singularity has been investigated, a point of application of external concentrated forces and moments. The importance of a given problem is due to the fact that at these points the internal force factors tend towards infinity and it is not possible to determine the size using elementary methods. At the same time, these singular points are the significant stress concentrators (both tangential and normal), which is why calculating the limits to which the internal forces and moments tend is essential to analyze the strength of plate structures. In order to describe an external load, it is proposed to apply the Dirac delta function of two variables. The models of external loads are presented. A given proposal makes it possible to accurately calculate the limits to which the transverse forces, as well as bending and torsional moments, tend at singular points of thin plates. We simulated plate bending using the variational Kantorovich-Vlasov method, which is fully compatible with the models of external load. The internal force factors at the singular points of plates were determined while solving the boundary value problems, formed based on the algorithm of BEM. The MATLAB environment was used for programming and computation. Results of the calculations are characterized by high accuracy and reliability, in particular the errors in determining the deflections of plates at singular points do not exceed 2.0 % and the errors for bending moments are not above 3.0 %. Recommendations have been given to solving different types of boundary problems on bending the plates with singular points based on the proposed approach. It has been established that an accurate model of the external load in the form of concentrated forces and moments fundamentally enables determining the internal forces and moments at the singular points of thin plates applying an algorithm of the variational Kantorovich-Vlasov method. Up to now, there are no data on the importance of internal forces and moments at the singular points of plates. It is also shown that when calculating the internal forces and moments of plates, it is inappropriate to apply a single term from a series of the Kantorovich-Vlasov method; the errors amount to significant magnitudes of the order of 43‒44 %
Authors and Affiliations
Leonid Kolomiets, Viktor Orobey, Oleksandr Daschenko, Yuri Ovcharov, Ruslan Lobus
Keywords
Related Articles
- EP ID EP528192
- DOI 10.15587/1729-4061.2018.142597
- Views 75
- Downloads 0
Construction of methods for determining the contours of objects on tonal aerospace images based on the ant algorithms
<p>A method has been proposed for determining contours of objects on tonal aerospace images based on ant algorithms. The method, in contrast to those already known, takes into consideration patterns in the image formatio...
Analytical study of starting current of the induction motor stator
<p>In a three-phase coordinate system, the induction motor is described by a system of nonlinear differential equations of the eighth order, which in a general case does not have an analytical solution. The system of IM...
Studying the physicochemical regularities in the color- and phase formation processes of clinker ceramic materials
<p>The paper reports results of a comprehensive study, aimed at developing formulation-technological parameters for obtaining volumetrically dyed clinker ceramic materials with a wide range of colors. A possibility has b...
Experimental research into aerodynamic characteristics of a nacelle with the enabled system of engine thrust neutralization
We have conducted an experimental study into aerodynamic characteristics of the structural scheme “wing ‒ twocircuit engine nacelle”. The data were acquired in the course of work of a promising system for the neutraliza...
Development of signal converter of thermal sensors based on combination of thermal and capacity research methods
<p class="a"><span lang="EN-US">The problem of functional integration of thermal and capacity research methods, which provides the possibility of realizing a new generation of analog frontend of the Internet of Things i...