Investigation of the Effect of Friction Stir Spot Welding of BH Galvanized Steel Plates on Process Parameters and Weld Mechanical Properties
Journal Title: Engineering, Technology & Applied Science Research - Year 2016, Vol 6, Issue 5
Abstract
This study evaluates the effect of Friction Stir Spot Welding (FSSW) pin shape on overlapping galvanized BH plates. FSSW is done at 4, 6 and 9 seconds dwell time at two rotational speeds (1500 and 1800 rpm) by tools with 10 and 14 mm shoulder diameter. Microstructural properties (OM and SEM), Vickers micro hardness and tension are tested on the welded spots. By increasing shoulder diameter from 10 to 14 mm to joint two plates, microstructural grain size decreases by 23% in SZ and 15% in TMAZ. Maximum fracture increases as shoulder diameter increases to 32%.
Authors and Affiliations
H. Sheikhhasani, H. Sabet, M. Abasi
Keywords
Related Articles
- EP ID EP110509
- DOI -
- Views 247
- Downloads 0
Analysis of Quality of Service for the AOMDV Routing Protocol
Due to the dynamic nature of Mobile Ad-hoc Networks (MANETs), the provision of Quality of Service (QoS) guarantees is challenging. The route failure probability in a MANET is increased due to the mobility of nodes, whic...
Experimental Evaluation of a Flat Plate Solar Collector Under Hail City Climate
Flat plate solar water heaters are widely used for water heating in low-temperature residential applications. In this paper the thermal performance of a solar flat plate water heater under Hail weather conditions (latitu...
Fat Quantitation in Liver Biopsies Using a Pretrained Classification Based System
Non-Alcoholic Fatty Liver Disease (NAFLD) is a common syndrome that mainly leads to fat accumulation in liver and steatohepatitis. It is targeted as a severe medical condition ranging from 20% to 40% in adult populations...
Petrophysical Evaluation of the Sarvak Formation Based on Well Logs in Dezful Embayment, Zagros Fold Zone, South West of Iran
Dezful embayment in the south west of Iran is part of Zagros fold zone which despite the small area includes almost all of Iran oil production. Sarvak Formation with middle cretaceous (Albin-Turunin) is the second bigges...
Performance Evaluation of Traveling Wave Fault Locator for a 220kV Hoa Khanh-Thanh My Transmission Line
This paper presents the traveling wave based fault location methods of SEL-400L, and SFL-2000 available on the market for a 66.9km, 220kV Hoa Khanh-Thanh My transmission line in Central Viet Nam, such as single-ended, an...