Investigation of the Effects of Processing Parameters on Basic Performance Outputs of AISI 1040 Steel by Electro Erosion Processing
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2015, Vol 3, Issue 1
Abstract
In this study, micro-holes drillability is experimentally studied using electro-discharge machining method (EDM). Within the scope of work, experiments are performed using four different processing parameters like that; three different discharge current (6, 12, 24 A), three different electrode rotational speed (200, 400, 600 rev/min), fixed on time (12 μs), fixed off time (3 μs) and three different dielectric pressure (40, 80, 120 P). After experiments carried out, the EDM process parameters like as a workpiece processing rate (MRR), electrode wear rate (TWR) and the relative wear (RW) were investigated on key performance outcomes. Whereby experimental results, with the received data from EDM basic performance outputs, seemed to be linked directly to processing parameters.
Authors and Affiliations
Volkan YILMAZ, Mustafa ÖZDEMİR, Hakan DİLİPAK
Keywords
Related Articles
- EP ID EP476072
- DOI -
- Views 89
- Downloads 0
Discrete Cosine Transformation in Human Face Images with Noise - Subband Based Face Recognition
In this work, face recognition performances of eigenface and Fisherface algorithms in different face subspaces obtained from Discrete Cosine Transform (DCT) coefficients and original images were evaluated. DCT coefficien...
COMPARISON OF FLAT AND INCARCERATING SURFACE SOLAR SUPPORTED DRYING SYSTEMS FOR APRICOT DRYING
In this study, drying systems with flat and incarcerating surface absorbent plates were designed and manufactured for drying apricots, then their performances were compared. Experiments were carried out with slices 4-5 m...
The Behaviour of Non-Structural Elements Under Earthquake Effect in Industrial Buildings
In our country, the earthquake risk of is considerably high in intensively populated and industrialized regions with ongoing high industrial development levels. During earthquakes, non-structural elements (NSE) can cause...
Examination of Microstructure and Mechanical Properties of Powder Metal AA 2014-SiC-B4C Composite / Hybrid Materials
In this study, the production, microstructure and mechanical properties of AA 2014 aluminum alloy and B4C-SiC ceramic particle reinforced hybrid metal matrix composite materials were investigated by powder metallurgy. Fo...
Experimental and Numerical Analysis of Shear Force in AISI P20 Steel Processing
This study consists of two parts as experimental measurement and numerical analysis of shear forces in AISI P20 steel turning with cementitious carbide cutting tool. In the experimental study, cylindrical turning was per...