INVESTIGATION OF WIRELESS CHANNELS ACCORDING TO THE STANDARD 802.11 IN THE FREQUENCY RANGE OF 5 GHZ FOR TWO SUBSCRIBERS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
In the given work the research of wireless channels of the family of standards of 802.11x in the frequency range of 5 GHz was taken into account taking into account the influence of architectural obstacles in the premises. As the main parameters for the research the effective transmission rate, the signal strength at the receiver input and the channel throughput are chosen. It has been established that the rate of transmission of information has a direct dependence on the signal transmission characteristic, therefore, to assess the level of signal fluctuations, it is necessary to use a confidence interval of power. On the basis of experimental research, a mathematical expression was obtained for evaluating the efficiency of wireless channels of the 802.11x family of standards for a frequency range of 5 GHz, taking into account the architectural obstacles in the room. It is established that in the presence of two subscribers in the network there are quite significant restrictions for high-performance modes.
Authors and Affiliations
Dmytro V. Mykhalevskiy, Oksana S. Horodetska
Keywords
Related Articles
- EP ID EP502281
- DOI 10.26480/jmerd.02.2019.50.57
- Views 73
- Downloads 0
MANUFACTURING ARBOLITIC BUILDING PRODUCTS USING SOLAR ENERGY
This article examines the potential of using arbolite as a building material based on agricultural waste, thereby solving the problem of product recycling and quality. This article introduces some innovative methods of t...
EFFECT OF DIFFERENT QUENCHING MEDIA ON MECHANICAL PROPERTIES OF AISI 1018 LOW CARBON STEEL
In this work, the mechanical properties of AISI 1018 low carbon steel after been treated by different quenching media (water, boiling water, boiling salt water, ice water, ice salt water) were evaluated. The microstructu...
SPECIFIC FEATURES OF RESEARCH AND DEVELOPMENT OF THE PASSIVE REDUNDANT SUBSYSTEMS OF THE AIRCRAFT WITH DUE CONSIDERATION OF TOLERANCES
The goal of this paper is to determine the specific features, which must be taken into consideration in the course of research and development of the passive redundant subsystems with due consideration of tolerances in t...
PERFORMANCE OF LOW-COST DUAL CIRCUIT SOLAR ASSISTED CABINET DRYER FOR GREEN BANANA
A low-cost solar cabinet dryer was designed to dry green banana. The dryer was made of low-cost material readily available locally. The dryer consists of two types of solar collector (air and fluid collectors), water tan...
NUMERICAL ANALYSIS FOR (H-Q) CURVE OF CENTRIFUGAL PUMPS USING NATURAL AND CONSTRAINED CUBIC SPLINE INTERPOLATIONS
This study is founded by numerical analysis to (H-Q) curve for centrifugal device pump with radial and axial flow fitted firstly with natural spline interpolation and secondly using reserved cubic interpolation spline. T...