Investigations of the Influence of Compatibilizer and TiO2 Filler on the Properties of Thermoplastic Polyurethane/Polyolefins Blends
Journal Title: International Journal of Research in Chemistry and Environment (IJRCE) - Year 2012, Vol 2, Issue 3
Abstract
Melt blending of thermoplastic polyurethane (TPU) with polyolefins (PO) can lower the cost and improve mechanical and chemical properties. Since thermoplastic polyurethane and polyolefins are completely immiscible polymers, property enhancement cannot be attained. Effect of incorporation of polypropylene copolymer (PPCP), TPU-g-MA, TPU-g-AA as compatibiliser on the miscibility of the blends and effect of TiO2 filler to enhance the mechanical properties were studied. Blends were produced by melt mixing using a single screw extruder. Mechanical and morphological properties were studies. The results show that the blend of thermoplastic polyurethane (TPU)/PO’s with suitable compatibiliser and mica gives excellent performance in all aspects.
Authors and Affiliations
Thomas Merlin, Kamble D. , John Neetha
Keywords
Related Articles
- EP ID EP156917
- DOI -
- Views 72
- Downloads 0
Effect of Polytetrafluoroethylene on Wear Properties and Extreme Load Carrying Properties of Lubricating Oil
In this paper, optimization of ultrasonication process to improve the mixing of polytetrafluoroethylene (PTFE) in lubricating oil has been done. The effect of PTFE on wear preventing and extreme pressure (EP) propert...
Volumetric and Viscometric Behaviour of Acrylic Esters with Hexane-2-ol at T= (298.15 And 308.15) K
Densities and viscosities for the three binary liquid mixtures of methyl acrylate, ethyl acrylate and butyl acrylate with hexane-2-ol at temperatures 298.15 and 308.15 K and at atmospheric pressure were measured over the...
Monitoring the Status of Anionic Surfactants in Various Water Systems in Urban and Rural Areas of Tirupati, Andhra Pradesh, South India
Facile, rapid, sensitive and selective spectrophotometric method for the determination of traces anionic surfactants (AS) viz., Sodium lauryl sulfate (SLS), Sodium dodecyl sulfonate (SDS), Sodium hexadecyl sulfonate...
Photo Catalytic Degradation of p- Nitro Aniline using Semiconductor ZnO and H2O2
Photo catalytic degradation of chemical pollutant in water was investigated for various parameters such as pH (4.0-9.0), irradiation time (0.0-150min.), light intensity (40.0-90.0mW/cm2 ), concentration of substrate...
[b] Application Impact of Coal Fly Ash, and Water Hyacinth on Cultivation of Tomato[/b]
[i]Few pot and field experiments were conducted to study the effect of levels of coal fly ash (CFA) which is a byproduct of Kota Super Thermal Power Station, on physicochemical properties of soil and the yield para...