ИССЛЕДОВАНИЕ ПОВЕДЕНИЯ ЦЕМЕНТНЫХ КОМПОЗИТОВ В УСЛОВИЯХ ПОВЫШЕННОЙ ВЛАЖНОСТИ И ПЕРЕМЕННЫХ ПОЛОЖИТЕЛЬНЫХ ТЕМПЕРАТУР
Journal Title: International Journal for Computational Civil and Structural Engineering - Year 2017, Vol 13, Issue 4
Abstract
In this paper, the results of testing cement composites under the conditions of the effect of high humidity and variable positive temperatures are given.By the coefficient of variation of hardness (stability), the compositions are compared with various fillers, plasticizing and other fungicidal additives.To decide on the stability (stability) of the structure and properties of composites, it is proposed to rely on the area of the polygon obtained as a result of piecewise linear approximation of the exposure points. Explanations of the influence of environmental factors on hardness change of the composites.
Authors and Affiliations
Irina V. Erofeeva, Victor V. Afonin, Vladislav A. Fedortsov, Denis V. Emelyanov, Nikolay Yu. Podzhivotov, Marina M. Zotkina
Keywords
Related Articles
- EP ID EP576831
- DOI 10.22337/2587-9618-2017-13-4-66-81
- Views 62
- Downloads 0
ДЛИННОПЕРИОДНЫЕ СЕЙСМИЧЕСКИЕ ВОЗДЕЙСТВИЯ И ИХ ВЛИЯНИЕ НА ПРОЧНОСТЬ КОНСТРУКЦИЙ ВЫСОТНЫХ ЗДАНИЙ
В настоящее время во всех строительных нормах диаграммы коэффициентов динамичности ограничены максимальным периодом собственных колебаний сооружений в 1.8 с. Однако такого диапазона явно недостаточно для расчета конструк...
MATHEMATICAL MODELING OF DIFFUSION PROCESSES OF MASS TRANSFER OF «FREE CALCIUM HYDROXIDE» DURING CORROSION OF CEMENT CONCRETES
The paper presents a mathematical model of mass transfer in the processes of corrosion of the first type of cement concrete at the level of phenomenological equations for a closed reservoir-liquid system. A step-by-step...
ABOUT SOLUTION OF MULTIPOINT BOUNDARY PROBLEMS OF TWO-DIMENSIONAL STRUCTURAL ANALYSIS WITH THE USE OF COMBINED APPLICATION OF FINITE ELEMENT METHOD AND DISCRETE-CONTINUAL FINITE ELEMENT METHOD PART 1: FORMULATION AND BASIC PRINCIPLES OF APPROXIMATION
The distinctive paper is devoted to formulation and basic principles of approximation of multipoint boundary problem of static analysis of deep beam with the use of combined application of finite element method and discr...
BOLTS PULLING TEST. REVERSER FOR BOLTS TESTING
The article describes developed device for performing pulling tests of bolts, including high-strength. Principle of reverser operation is change of sign of applied load – compression of press causes stretching of a bolt....
ABOUT WAVELET-BASED COMPUTATIONAL BEAM ANALYSIS WITH THE USE OF DAUBECHIES SCALING FUNCTIONS
The first part of the distinctive paper contains brief review of wavelet-based numerical and semianalytical analysis, particularly with the use of Daubechies scaling functions. The second part of the paper is devoted to...