Large Scale Industrial Temperature Monitoring and Control System using Lab View through Ubs (Manual and Automatic Modes)
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 2
Abstract
the temperature monitoring and control system can be done in computer (PC) using Laboratory Virtual Instrumentation Engineering Workbench (LABVIEW) software. To obtain the quality of service in the industries, data acquisition plays an important role. The main purpose of using LABVIEW is for data acquisition. The temperature is measured by the temperature sensor (LM-35) and the obtained analog signal is processed by the microcontroller (LPC-1768). The LABVIEW acquires data from the microcontroller through USB port for further processing of the data. The data is processed and displayed in the LABVIEW. The system control and automation can be done through the help of control circuitry in the LABVIEW. There are two modes, “automatic” and “manual”, in which either one can be selected in the LABVIEW. The temperature values obtained can be stored into the excel sheet through the LABVIEW.
Authors and Affiliations
Balla Pavan Kumar, B Karthikeyan
Keywords
Related Articles
- EP ID EP388729
- DOI 10.9790/1676-1302038995.
- Views 145
- Downloads 0
Comparison of Solar Photovoltaic Energy Systems Fixed Installation configuration with Single Tracking System
This paper describes the fixed PV systems tilt angle and the single tracking system. It looked at the performance of each system in terms of the voltage output and compares the two to find a better performing system. Thi...
Design of Large Scale Decentralized Low-Order Robust Control System Stabilizer to Mitigate the Damping of the System
A discrete system is a system with a countable number of states. Discrete systems may be contrasted with continuous systems, which may also be called analog systems. A final discrete system is often modeled with a direct...
A Review on Electrical Power System Contingency Ranking Using Artificial Intelligence Techniques
Contingency analysis is an important aspect of power system security assessment. Various probable outages is analyzed .Some cases may lead to transmission overload or bus limit violation. Such critical contingencies shou...
Investigation of Matrix Converter for Wind Energy Conversion
: The proposed series Z-source matrix converter topology investigates the output voltage, the inrush current and the voltage across the capacitor between the stages. In this paper, that idea is implemented on a three-pha...
Load Shedding Strategy in Electrical Power System Using Under Frequency Relay
Stability of power system can be defined as its property which keeps several parameters in the balanced operating condition when sudden disturbances occur. In the stable operating condition, mechanical power input in the...