Laser transformation hardening effect on hardening zone features and surface hardness of tool steel AISI D2
Journal Title: Mechanics and Advanced Technologies - Year 2017, Vol 79, Issue 1
Abstract
The relationship of technological input regimes of the laser transformation hardening on change the hardening depth, hardening width, and hardening angle, as well as surface hardness of the tool steel AISI D2 using multifactor experiment with elements of the analysis of variance and regression equations was determined. The laser transformation hardening process implemented by controlling the heating temperature using Nd:YAG fiber laser with scanner, pyrometer and proportional-integral-differential controller. The linear and quadratic regression models are developed, as well as response surface to determine the effect of the heating temperature and feed rate of the treated surface on the energy density of the laser beam, hardening depths, hardening width, hardening angle, and surface hardness are designed. The main effect on the energy density of the laser beam has a velocity laser treatment, on the other hand, the main effect on the geometrical parameters of the laser hardened zone and surface hardness has temperature heating are shown. The optimum magnitudes of the heating temperature (1270 °C) and feed rate of the treated surface (90 mm/min) for laser transformation hardening of the tool steel AISI D2 using fiber laser with scanner were defined.
Authors and Affiliations
D. Lesyk, V. Dzhemelinskyi, S. Martinez, А. Lamikiz, О. Dаnylеikо
Keywords
Related Articles
- EP ID EP456481
- DOI 10.20535/2521-1943.2017.79.95851
- Views 62
- Downloads 0
Characteristics of throttles in hydraulic shock absorber considering temperature changes of fluid
The work is devoted to experimental research of hydraulic damper throttle elements characteristics. The throttles that are formed by the functional gaps between the piston and the cylinder and piston and rod, the piston...
The structure of inertial flows in a fuel tank with guide baffles
Purpose. Research of hydrodynamic mechanism of internal fuel flows in the spacecraft tanks with internal baffles for effective control. Methodology and approach. In the paper it is shown experimental and numerical simula...
Ефективна концепція регресивного аналізу
Досліджено ефективну концепцію регресійного аналізу при моделюванні складних систем і процесів. Метою даної роботи є використання методу формалізованого отримання структури багатофакторної регресійної моделі і стійкого о...
Study of energetic balance of the hydraulic system with fixed displacement pump and pressure relief valve
<p><em>It was analyzed </em><em>the basic schematics implementing energy level of industrial hydraulic systems. It was considered the structure and composition of the hardware system of fixed displacement pump and pressu...
Моделирование процесса радиально-обратного выдавливания полых деталей
Энергетическим методом верхней оценки проведено исследование силового режима процесса комбинированного радиально- обратного выдавливания полых деталей типа «стакан с фланцем» из сплошной заготовки. Сопоставлены различные...