The structure of inertial flows in a fuel tank with guide baffles
Journal Title: Mechanics and Advanced Technologies - Year 2017, Vol 79, Issue 1
Abstract
Purpose. Research of hydrodynamic mechanism of internal fuel flows in the spacecraft tanks with internal baffles for effective control. Methodology and approach. In the paper it is shown experimental and numerical simulation results of internal fuel flows in the spacecraft tanks with internal baffles, moving on the Earth's orbit. The structure of near wall flows - wall region, wake, around the baffle edges etc are shown. There are several cases that are shown for one, two and many vorticies or circulations around the baffles and outside of them, that characterize the energetic parameters of inertial flows in the tanks. The analysis of the structure and nature of circulating flows in the range of Reynolds numbers 700 ... 12500is presented, which allows to make a picture of axially symmetric circulation flow and rationally arrange the guide baffles in the inertial fuel flows. So, this provides to make a rational choise of effective facilities for compensating the disturbing influences on the tank walls by the fluid and substantial savings in spacecrafts long term flight at the Earth orbit.
Authors and Affiliations
V. Kovalev
Динамічне управління коливаннями при точінні
Коливання грають вирішальну роль при точінні, зокрема при формуванні мікропрофілю поверхні. Їх вплив особливо проявляється при точінні деталей діаметром менше 10-12 мм з використанням великих, 5000 об/хв та більше частот...
Numerical simulation of cold forging process to investigate folding defect in enclosed dies
<em>In the</em><em> precision forging industries, improving product quality and reducing product cost are important cases. Enclosed-die forging is one of the precision forging processes. In this paper, the cold forging p...
Engineering method for research of stress state in concentration areas of welded joints with symmetrical reinforcement
<p>Abstract. Subject, theme, aim. The subject of research in this work is the stress distribution in stress concentration areas of welded joints with double-sided symmetrical reinforcement. The topic of this work is rela...
Hot forming hollow products from high strength aluminum alloy with required treatment of metal structure by plastic deformation
<em>Using the finite element method conducted research of technology and established parameters of hot forming hollow products of alloy V93pch with required treatment of metal structure by plastic deformation to provide...
Study of energetic balance of the hydraulic system with fixed displacement pump and pressure relief valve
<p><em>It was analyzed </em><em>the basic schematics implementing energy level of industrial hydraulic systems. It was considered the structure and composition of the hardware system of fixed displacement pump and pressu...