Engineering method for research of stress state in concentration areas of welded joints with symmetrical reinforcement
Journal Title: Mechanics and Advanced Technologies - Year 2017, Vol 79, Issue 1
Abstract
<p>Abstract. Subject, theme, aim. The subject of research in this work is the stress distribution in stress concentration areas of welded joints with double-sided symmetrical reinforcement. The topic of this work is related to development of engineering method of<br />describing the stress state in the transition areas of weld to the base metal of butt and cruciform welded joints. The aim consists in establishing of mathematical relationships that describe the change of the first principal stress on the contour of the investigated area, and in the depth of the welded joint at tension and bending.</p><p>Method or methodology. In order to establish the equilibrium conditions which exist in the section of stresses at external force factors in the development of research method of stress state was used the hypothesis of broken cross sections. Mathematical<br />dependences which describe the stress distribution in the areas of concentration, and the formulas for determining of stress concentration factor was obtained by means of developed method, and the adequacy of these formulas was verified by numerical<br />calculation by finite element method.<br />Results. Using the formulas which corresponding to the tenets of the proposed method for butt-welded joints with a relative transition radius from weld to the base metal between 0,4 and 2,6 the SCF was calculated. Comparative analysis of the obtained<br />results with the results of numerical calculation by finite element method showed that the maximum deviation for tension was 1,10%, and for bending it was 0,91%.<br />Field of application of the results. The formulas which obtained in the result of research can be used for the calculation of stress concentration factor in the butt and cruciform welded joints with a high value of the relative transition radius from weld to the base<br />metal.</p>
Authors and Affiliations
А. Moltasov, P. Tkach, S. Motrunich
Keywords
Related Articles
- EP ID EP456487
- DOI 10.20535/2521-1943.2017.79.94900
- Views 53
- Downloads 0
Hot forming hollow products from high strength aluminum alloy with required treatment of metal structure by plastic deformation
<em>Using the finite element method conducted research of technology and established parameters of hot forming hollow products of alloy V93pch with required treatment of metal structure by plastic deformation to provide...
Programming of adaptive machining for end milling
The problem of performing adaptive machining to program the milling of the detail contours on the CNC machine in case of virtual-location procurement is solved. The correction of the CNC-program by measuring the actual p...
Повышение производительности ультразвуковых распылителей жидкости
Рассмотрены вопросы создания ультразвуковых резонансных систем для реализации способа ультразвукового распыления жидкости в тонком слое. Детально рассмотрена физическая модель такого способа распыления и показаны возможн...
Модернізація вакуумного захвату мобільного крокуючого робота
Запропоновано принципово новий захват мобільного крокуючого робота довільної орієнтації, що дозволяє суттєво підвищити надійність утримання мобільного робота на поверхні переміщення за рахунок застосування пристрою зворо...
Rigidity of the affected femurs with systems of surgical treatment
Purpose. Subject matter of the present paper is to investigate the characteristics of rigidity and reliability of fixing of pathological changes at metastatic defeat are investigated in real, including cyclic, the modes...