LOAD SIMULATION AND ANALYSIS OF THE STRESS-STRAIN STATE OF THE ELEMENTS OF A CASTING CRANE TRAVERS
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2019, Vol 84, Issue
Abstract
Problem. Casting cranes are operated for a long time in difficult conditions - high temperatures, dynamic loads, significant pollution of the environment. In this case, the value of dynamic loads arising during operation may exceed those adopted during the design, and adverse operating conditions are not taken into account at all. Refinement of methods for calculating the strength of cranes, the development of new methodologies is an important scientific and technical problem, the solution of which will improve the safety of the operation of load-lifting cranes, in particular foundry ones. Goal. The purpose of this work is to simulate loading during ac-celeration of the casting crane and analysis of the actual stressstrain state of the elements of the travers, taking into account the temperature effect and additional inertial loads. The object of the study is the pattern of stress distribution in the elements of the traverse. Methodology. The article proposes a methodology for modeling and analysis of the stress-strain state of the casting crane travers taking into account addi-tional loads, based on the methods for strength calculations for allowable stresses and the method of finite elements. A design scheme, a solid-deformed model was developed, and a finite element calcula-tion was performed in the CAD / CAE system. Results. The results of calculations and analysis are given. The obtained regularity of the distribution of stresses in the elements of the traverse clearly showed that the places of concentration of maximum stresses coincide with the actual places of destruction in them; the stressstrain state of the elements of the traverse is rather complicated, since in one element in different planes both compressive stresses and tensile stresses arise, which are interchanged during the operation of the crane. Originality. Previously, a methodology was proposed for analyzing the stress-strain state of metal structures of cranes. On the basis of this, the regularity of the stress dis-tribution in the elements of the travers of a casting crane with regard to additional loads is obtained. The analysis of the stress-strain state has been made. Directions for further research are identified. Practical value. The use of various strength analysis methods requires a certain methodology for their application, which, in combination with modern computers and CAD / CAE software, will allow for qualitative research and analysis of the stress-strain state of elements and metal structures of cranes.
Authors and Affiliations
Y. Sahirov, V. Suglobov, A. Reznikov
Keywords
Related Articles
- EP ID EP542123
- DOI 10.30977/BUL.2219-5548.2019.84.0.5
- Views 88
- Downloads 0
MATHEMATICAL MODELING OF NOISE IN THE LABORATORY WORKSHOP ON BASICS OF LABOUR PROTECTION
A mathematical model of the sound field in the industrial premises has been considered. The required installation-specific settings for modelling in MathCAD 14 and 3D-graphic of sound fields applications have been given....
ВПРОВАДЖЕННЯ СУЧАСНИХ ТЕХНОЛОГІЙ КОМП’ЮТЕРНОГО ПРОЕКТУВАННЯ В НАВЧАЛЬНИЙ ПРОЦЕС ХНАДУ
Розглядаються питання підвищення якості інженерної освіти з використанням комп’ютерного проектування, зокрема при розробці та розрахунках найпоширеніших вузлів та деталей машинобудування, дизайну їх форми, під час розв’я...
ABOUT LINEAR DEPENDENCES OF THE THERMAL CONDUCTIVITY COEFFICIENT OF ASPHALT CONCRETE ON THE CONTENT OF OF RUBBLE AND TEMPERATURE
Analysis of the existing data concerning the dependence of thermal conductivity on the temperature is analyzed. The dependence of thermal conductivity coefficient of asphalt concrete on the content of rubble and test tem...
НАЦІОНАЛЬНЕ ЗАКОНОДАВСТВО ЩОДО ДЕРЖАВНО-УПРАВЛІНСЬКИХ МЕХАНІЗМІВ ЗАБЕЗПЕЧЕННЯ БЕЗПЕКИ ДОРОЖНЬОГО РУХУ
Проаналізовано державно-управлінську діяльність по забезпеченню безпеки дорожнього руху в Україні, та на підставі системного аналізу кращого європейського досвіду запропоновано шляхи щодо її удосконалення.
HITCHING DESIGN FEATURES OF SCRAPERS WORKING IN TANDEM
The design features of hitch mechanisms have been analyzed based on scientific-technical and patent-licensing information.