Location and optimal sizing of photovoltaic sources in an isolated mini-grid
Journal Title: TecnoLógicas - Year 2019, Vol 22, Issue 44
Abstract
This article introduces a new mixed integer linear programming model that guarantees the optimal solution to the location and sizing problem of distributed photovoltaic generators in an isolated mini-grid. The solar radiation curves of each node in the mini-grids were considered, and the main objective was to minimize electric power losses in the operation of the system. The model is non-linear in nature because some restrictions are not linear. However, this article proposes the use of linearization techniques to obtain a linear model with a global optimal solution, which can be achieved through commercial solvers; CPLEX in this case. The proposed model was tested in an isolated 14-bus mini-grid, based on real data of topology, demand and generation adapted to a balanced operation. This model shows, as a result, the optimal location of photovoltaic generators and their optimal capacity produced by the maximum active power delivered at the maximum solar irradiation time of the region. It is also evident that the hybrid operation between small hydroelectric power plants and photovoltaic generation improves the network voltage profile and the electric power losses without the use power storage systems.
Authors and Affiliations
Juliana Jiménez, John E. Cardona, Sandra X. Carvajal-Quintero
Keywords
Related Articles
- EP ID EP549648
- DOI 10.22430/22565337.1182
- Views 106
- Downloads 0
Analysis of the efficiency of a virtualoptical multiplexing method, by using theta modulation
We present an efficient virtual-optical multiplexing method for compressing information contained in gray level images. The efficiency is measured using three parameters: quality factors of...
Microfabrication of position reference patterns onto glass microscope slides for high-accurate analysis of dynamic cellular events
Los portaobjetos de microscopio se utilizan ampliamente como sustratos base in situ para larealización de diversos sistemas o elementos microfabricados. Para estos fines, el proceso de microfabricación consiste en trans...
Implementation of the TRIGRS model with reliability analysis for hazard assessment of shallow rainfall-triggered landslides
Landslides triggered by rainfall infiltration are common in tropical regions. Slope failures represent one of the most common causes of human and economic losses around the world. This study presents a methodology for ha...
Methodology for determining angular displacement in three-phase transformers
This paper presents methodology for determining angular displacement (connections or vector group (colloquial)) in three-phase transformers. The proposed methodology is useful to determin...
Location and optimal sizing of photovoltaic sources in an isolated mini-grid
This article introduces a new mixed integer linear programming model that guarantees the optimal solution to the location and sizing problem of distributed photovoltaic generators in an isolated mini-grid. The solar radi...