Low-Order GAM Admire System in Landing Preparation Phase
Journal Title: INCAS BULLETIN - Year 2011, Vol 3, Issue 3
Abstract
In this paper the symbolic and numeric computations for the simplified GAM (Generic Aerodynamic Model) Admire system are presented . The numeric computations were performed into the MatLab environment with the aim of presenting to the reader the details of the preparation for landing of the airplane generic model. Regarding the symbolic computations that have been made it's worth to mention here the fact that they concerned the issues of stability in the manner that the trim point for the low order non-linear system was computed and an analysis of the eigenvalues of the Jacobian matrix associated to the system, which has been evaluated in the trim point, was performed. The case of the stable longitudinal level descending flight and the case of transition to a state appropriate for the touch-down are presented. It is shown the fact that the plane can regain stability if the real moment for touch-down is missed by reentering into the stable longitudinal level descending flight (by usage of the control δe).
Authors and Affiliations
Ionel IORGA
Keywords
Related Articles
- EP ID EP139963
- DOI 10.13111/2066-8201.2011.3.3.8
- Views 76
- Downloads 0
Control of uncertain systems by feedback linearization with neural networks augmentation. Part II. Controller validation by numerical simulation
The paper was conceived in two parts. Part I, previously published in this journal, highlighted the main steps of adaptive output feedback control for non-affine uncertain systems, having a known relative degree. The mai...
ELIE CARAFOLI – THE MAN, THE TEACHER AND THE SCIENTIST
LOW FREQUENCY DAMPER
The low frequency damper is an autonomous equipment for damping vibrations with the 1-20Hz range. Its autonomy enables the equipment to be located in various mechanical systems, without requiring special hydraulic instal...
A Rotary Wing System for Micro Air Vehicle Applications. Part 1
The goal of the paper is to propose a new type of ornithopter that avoids the mechanical difficulties of a flapping system. It uses a modified design of a cycloidal propulsor. The modification regards the special setting...
Aluminum/glass fibre and aluminum/carbon fibre hybrid laminates
The metal/fibre hybrid laminates consist of an alternation of 0.2 ÷ 0.5 mm metallic sheets (Aluminum or Titanium in Aeronautical Engineering) and pre-pregs made of unidirectional carbon or aramid or glass fibre or of th...