LTE and GPS based Deca Band Printed Antenna for Cellular Mobile Handset Communication Applications

Abstract

This paper presents novel mobile phone antenna for radiations simultaneously in ten frequency bands for applications of LTE (Long-Term Evolution), GPS (Global Positioning System), GSM (Global System for Mobile Communications), PCS (Public and Commercial Services), DCS (Distributed Control System), UMTS (Universal Mobile Telecommunications System) and WiMAX (Worldwide Interoperability for Microwave Access). The antenna demonstrates novel characteristics for resolving the challenge of simultaneous radiation capabilities for the GSM and GPS applications with frequencies of 850/900 and 1575 MHz respectively, along with resonances at frequency band of 700 MHz for LTE applications, 1800 and 1900 MHz for PCS and DCS applications, 2100 MHz for UMTS applications, 2400 and 2500 MHz for LTE applications and 3300 MHz for WiMAX applications with S11 = - 6 dB matching criteria (VSWR 3:1). The antenna architecture comprises top and bottom copper layers embedded with monopole radiating element, branch line, slots and various stub lines. The desired operating bands are achieved in a compact area with overall dimensions of 0.8x60x120 mm for the height, width and length respectively of the antenna providing suitable platform for mobile handset applications. Omni-directional radiation pattern characteristics are achieved throughout the range of frequencies by designing the proposed antenna in monopole configuration. Proposed antenna is fabricated and results for the surface currents, s-parameters and 3D (Three-Dimensional) gain plots are illustrated for the proof of concept.

Authors and Affiliations

Syed Sheraz -ul- Hasan Mohani, K. Raza

Keywords

Related Articles

Convolutional Code Based PAPR Reduction Scheme for Multicarrier Transmission with Higher Number of Subcarriers

Multicarrier transmission technique has become a prominent transmission technique in high-speed wireless communication systems. It is due to its frequency diversity,small inter-symbol interference in the multipath fading...

Detection and Classification of Rice Diseases: An Automated Approach Using Textural Features

Image processing techniques are widely used for the detection and classification of diseases for various plants. The structure of the plant and appearance of the disease on the plant pose a challenge for image processing...

Effect of Lowering Twist Levels on Quality Parameters of Rotor Spun Cotton Yarn

Investigations were made to explore the influence of lowering twist level on quality characteristics of rotor spun yarn. Three levels of yarn linear density (i.e. 40, 35 and 30 tex) and five levels of twist (i.e. 700, 60...

LED Based Optical Wireless Communication System for WBAN

In this paper the O-WBANs (Optical Wireless Body Area Networks) is presented as an alternative to the radio and microwave BANs which are plagued with issues like interference, power hungry, hazardous and costly spectrum....

Flood Management Current State, Challenges and Prospects in Pakistan: A Review

Flooding is globally a major natural hazard. Floods result in property and life loss and poor economic development. Though it is not possible to prevent the occurrence of floods, but their negative impacts could be minim...

Download PDF file
  • EP ID EP549775
  • DOI 10.22581/muet1982.1902.06
  • Views 99
  • Downloads 0

How To Cite

Syed Sheraz -ul- Hasan Mohani, K. Raza (2019). LTE and GPS based Deca Band Printed Antenna for Cellular Mobile Handset Communication Applications. Mehran University Research Journal of Engineering and Technology, 38(2), 313-320. https://europub.co.uk/articles/-A-549775