Macroscopic quality evaluation of lacquered steel sheets
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 1
Abstract
This paper deal with the evaluation of quality of lacquered sheets with different pre-treatments after corrosive loading. Samples will be divided into groups according to the type and duration corrosion loadings. After exposure to corrosive salt mist corrosion chamber, the samples will be evaluated macroscopically according to relevant standards. Low degradation after all time corrosion load was on the sample pre-treated with an alkaline degreasing in combination with a yellow chromating and the samples pre-treated with an alkaline de-greasing in combination with surface passivation. On these samples showed no loss of adhesion to the base material and the evaluation of delamination due to corrosion during loading had a low degree of degradation. Surfaces after the cross-cut test did not for both sets of sam-ples after corrosion load all times no defects in the adhesion layer.
Authors and Affiliations
Jaroslava Svobodová, Sylvia Kuśmierczak
Keywords
Related Articles
- EP ID EP165635
- DOI -
- Views 93
- Downloads 0
The assessment of quality of products using selected quality instruments
The quality parameters of products should be controlled at every stage of the production process, since it allows detection of any problems even in the initial stages of production processes and removes their causes duri...
Engineering production education in e-learning example in Poland
It can be observed that the modern world which is subjected to a variety of changes, in particular socio-economic and civilizational ones, known commonly as the so called information revolution creates the need for inten...
The influence of modification for structure and impact resistance of silumin AlSi11
In this paper the results of the modification process of alloy AlSi11 as well as the influence of modification for structure and im-pact resistance have been presented. The investigation revealed that the modification of...
MICROSTRUCTURAL FEATURES EVALUATION OF AGE-HARDENED A 226 CAST ALLOY BY IMAGE ANALYSIS
Age-hardening provides one of the most widely used mechanisms for the strengthening of aluminum alloys. The age-hardening involves three steps: solution treatment, quenching and aging. The temperature of solution tre...
Selected aspects of hydraulic issues in heating systems
Rational and efficient use of thermal energy in recent years has resulted in significant changes in the heating system as well as technological progress. In order to design a heating system properly and exploit it correc...