Mathematical model of the reverse water postpurification at mining enterprises when using electromagnetic focusing of contaminants
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 10
Abstract
This study addresses the post-purification of reverse water by the electromagnetic focusing of charged particles in contaminants of polychlorinated biphenyls at mining enterprises. We established functional dependences of the Larmor radius of focusing of contaminant ions on operating parameters of the electromagnetic post-purification system (current strength of the focusing coil, length of the focusing coil), which allowed us to justify the required current of 0.025 A in the focusing coil for the post-purification of a liquid from polychlorinated biphenyls. The developed model of the electromagnetic system for water post-purification from the ions in contaminants made it possible to select the required Larmor radius for focusing the polychlorinated biphenyls in order to remove them effectively from a flow of liquid. As a result of post-purification, the contaminants are focused along the axis of the main flow that enables their removal through an additional branch pipe. Under the effect of the orbital moment that occurs due to magnetic induction, the motion vector of contaminants changed, and they are focused in the center of the fluid flow. We established the logarithmic dependence of height of the focusing paraboloid, which decreases from 0.057 m to 0.032 m with an increase in current of the focusing coil from 0.01 A to 0.1 A. This is due to an increase in the kinetic energy, transmitted by the charged particles, and an increase in the centripetal force. Determining the height of the focusing paraboloid makes it possible to effectively place the equipment for the removal of contaminations from the flow, and purify it
Authors and Affiliations
Oleg Terentiev, Kostiantyn Tkachuk, Oksana Tverda, Anton Kleshchov
Keywords
Related Articles
- EP ID EP527805
- DOI 10.15587/1729-4061.2018.122000
- Views 87
- Downloads 0
Development of the method for the formation of one-dimensional contours by the assigned interpolation accuracy
<p>The purpose of the study is to develop a method for the formation of a one-dimensional contour with provision of a given accuracy of interpolation. Determination of the accuracy of interpolation relies on the formatio...
Investigation of the structure and sorption peculiarities of cobalt and uranium ions by nanocomposites based on montmorillonite and tetraethoxysilane
<p>The structure and adsorption characteristics of silica -and montmorillonite-based nanocomposites are investigated. Tetraethoxysilane was used as a source of silica. The porous structure was investigated by the method...
Analysis and optimization of the reactive power compensation modes in a power supply system
<p>The paper reports the study of modes in a single-phase generalized power supply system in terms of improving energy indicators in the system by compensating for the reactive power. We considered three test versions of...
Exploring the process to obtain a composite based on Cr2O3–AlN using a method of hot pressing
<p>We have established the influence of heating rate of 150, 350 and 600 °C/min, pressure of 8 and 18 MPa, on the compaction process of the reaction mixture Cr<sub>2</sub>O<sub>3</sub>–15AlN<sub>nano</sub>, the hardness...
Development of methods for structural and logical model unification of metaknowledge for ontologies evolution managing of intelligent systems
<p>The relevance of the study is due to the importance and necessity of unifying the construction and use of intelligent decision support systems for managing complex industrial facilities and systems.</p><p>The aim of t...