MEASUREMENT METHOD OF SHAPE DEVIATION OF CYLINDRICAL MICRO-LENSES USING FOCUSED LASER BEAM AND REFERENCE AXIS<br />
Journal Title: Metrology and Measurement Systems - Year 2007, Vol 14, Issue 3
Abstract
Constant progress in application of micro-lenses in many modern optical systems caused a continuous increase of the need to investigate methods of their measurement. A new method of measurement of shape deviation of such cylindrical micro-lens has been proposed. The concept is based on measurements of the distance between a reference and the lens surface in various directions. The reference points are established by the rotation axis of a precise rotary table. Detection of the surface of the measured object has been done using a focused laser beam moved by a high-resolution piezotranslator. In the paper we will show the results from our first measurements and we will discuss the advantages and disadvantages of our method as well as the method's accuracy.
Authors and Affiliations
ADAM WOŹNIAK, MACIEJ KRETKOWSKI, RYSZARD JABŁOŃSKI
Keywords
Related Articles
- EP ID EP83142
- DOI -
- Views 82
- Downloads 0
DIAGNOSIS OF THE OPERATIONAL STATUS OF ELECTROMECHANICAL DEVICES WITH AN OPTICAL FIBER VIBRATION SENSOR
In the presented paper a prototype of an optical fiber vibration sensor is described as a tool for diagnosis of machines and electromechanical devices. The application of the optical fiber as a sensor allowed a design of...
MEASUREMENT METHOD OF SHAPE DEVIATION OF CYLINDRICAL MICRO-LENSES USING FOCUSED LASER BEAM AND REFERENCE AXIS<br />
Constant progress in application of micro-lenses in many modern optical systems caused a continuous increase of the need to investigate methods of their measurement. A new method of measurement of shape deviation of such...
ACCURACY ANALYSIS OF WIM SYSTEMS CALIBRATED USING PRE-WEIGHED VEHICLES METHOD
Accuracy of WIM (Weigh-In-Motion) systems depends on several factors, of particular importance is the calibration procedure. Parameters of the calibration process have essential influence on accuracy of weighing results....
PRE-PROCESSING AND PATTERN RECOGNITION METHODS FOR ARTIFICIAL OLFACTION SYSTEMS: A REVIEW
Data analysis is a fundamental part of artificial olfaction systems. Nonetheless, while electrical and mechanical components of electronic noses are deeply investigated and optimised for the specific applications, data a...
NEW INSTRUMENTS TO MEASURE PARAMETERS OF INFRA-LOW FREQUENCY VOLTAGE SIGNALS<br />
The paper presents the design, the principles of operation and the technical specification of two types of infra-low frequency voltage instruments: the integrating converter instrument and the microprocessor instrument....