Mechanical and Laser Cladding of High-Speed Steel on a Steel Support
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 2
Abstract
Multilayer cladding by injection of high-speed steel powder with 0.82%C, 4.7%Mo, 6.4%W, 4.1%Cr, 2.02%V, 0.3%Mn, as chemical composition, in melted bath by CO2 continuous wave laser connected to x-y-z coordinate table was tested in order to increase the wear resistance and heat proving of tool active surfaces made of 0.45%C steel. Layers made by different laser running were characterized by macro and microstructure analysis, as well as phase quality analysis by X ray diffractometry, microhardening analysis and hardness finding on coated layer surface in order to establish the optimal cladding run. Lathe tools made by this procedure showed a good behavior when steel shaping.
Authors and Affiliations
Dan Teodor LEVCOVICI, Radu BOICIUC, Sanda Maria LEVCOVICI, Constantin GHEORGHIEŞ
Keywords
Related Articles
- EP ID EP664279
- DOI -
- Views 95
- Downloads 0
Mathematical Model Cooling Agglomeration Ferrous in Layer
Mathematical model is based on discretization agglomeration areas layer deposited on very small. The τ Δ cooling time and the elements of space and elements xi time relationship is discretization as volume control. Based...
Analysis of Structural Components Existing in Steel Making Slag Sampled from Steel Making-Continuous Casting Flow Sheet
Hereby paper work aims to identify and analyze the structural constituents from the steel making shop slag. Therefore, slag specimens sampled from different stages of steel making-continuous casting flow sheet in Mittal...
Comparative Characteristics of Martensite and Bainite in Cu-Based SMAs
The present work reports the evolution of micro-structure and shape memory behavior in a Cu-15 Zn-6 Al (mass. %) shape memory alloy (SMA), as a function of the applied hot working procedure and of the performed heat trea...
Corrosion Behaviour of Tombac Used in Cult Objects Manufacturing
Corrosion of metals and metallic alloys is due to their thermodynamic instability in relation to their oxidation form. Corrosion tests performed in this work simulate the exposure conditions in different environments of...
Half-Finished Technology of Steels and Fatigue Strength
The paper presents the bending fatigue testing for four steel brands. The test showed that the fatigue strength is decreasing with the increasing of both ingot size and the rolled sheet thickness. The fatigue strength is...