Mechanical Properties Assessment of Ultra High Performance Fibre Reinforced Concrete (UHPFRC)
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 6
Abstract
The present paper is aimed to assessment of UHPFRC the conventional concrete is replaced by UHPFRC, an Advanced Cement based Super plasticised concrete with high workability and low water cement ratio. The constituents are optimised in granular packing such as Portland cement, silica fume, sand, quartz sand, high range water reducer admixture, steel fiber, with an improved form of homogeneity and compactness, durability, the research work is carried out to achieve enhanced target compressive strength 150 N/mm2. The optimised effort to reach strengths in compressive, split tensile and flexural strengths. The influence of temperature on concrete was identified and highlighted.
Authors and Affiliations
Sudarshan N. M. , Dr. T. Chandrsekhar Rao
Keywords
Related Articles
- EP ID EP21009
- DOI -
- Views 256
- Downloads 4
Design and Implementation of Energy efficient MAC Layer for Indoor Real Time Localization Systems
Positioning is a technique that is used to locate mobile devices in real-time or near real time. As GPS system can’t truck movable objects accurately in indoor environment there have to be another method that should be...
Open-End-Winding PMSG for Wind Energy Conversion System with Dual Boost NPC Converter
Commercial wind turbines have increased in size and power in the last decade, reaching 7.5MW. This has driven the development of new converter generator wind turbine configurations where permanent magnet synchronous ge...
Experimental Study on Glass Fiber Reinforced Concrete
Concrete is most widely used construction material in the world. But, it has low tensile strength, low ductility and low energy absorption. The cause of poor tensile behavior of concrete is its low toughness and defects...
An Expert System Tool for Diagnosis of Fever
Now a day’s many people are suffering from fever. It is not that easy to identify the type and symptoms of the fever. To know about the fever the patient as to undergo various lab test, using test report he doctor will...
slugDesign and Simulation of Three StagespHEMT LNA At C-Band
Thispaper represents the designing of three stage LNA using EC2612 pHEMT technology.pHEMT technology gives high transconductance and shows better reliability. This three stage amplifier has been designed for C-band appl...