Mechanical properties of polyepoxide composites with oxidized graphene and their chemical stability
Journal Title: Поверхня - Year 2018, Vol 25, Issue 10
Abstract
Polymer composite materials based on epoxy resin filled with oxydized graphene in the form of blocks with a micrometer base surface and nanometer thickness with a concentration of 1, 2 and 5 wt. % The samples were of two types and differed in the time of exposure (up to 25 days and 6 hours) in a mixture of liquid polymer with disperse filler. After exposure, an additive was added to the mixture and the compositions were prepared. The chemical stability of composite materials was determined as the degree of swelling in solutions: acetone - ethyl acetate and 25% of a solution of nitric acid. In this work, the mechanical parameters of the samples were studied: compressive strength, tensile strength from the steel surface, abrasion resistance on steel surface and flexural strength. It have been established that the mechanical parameters and chemical stability of the filled composites have a nonmonotonic dependence on the producing method of the composite matrix and of the filler concentration. It was shown that two types of graphene composites have a higher resistance to swelling in a solution of nitric acid, and with the loading of 0.01% oxidized graphene their chemical resistance deteriorates. Besides, samples with a longer exposure time of the filler in the polymer matrix are characterized by increased chemical resistance to aggressive media. Correlation of the concentration dependences of the swelling and the mechanical parameters that have an extremum at a filling concentration C = 1 wt. % is not observed.
Authors and Affiliations
N. V. Sigareva, D. L. Starokadomskiy, B. M. Gorelov, O. O. Tkachenko
Keywords
Related Articles
- EP ID EP463597
- DOI 10.15407/Surface.2018.10.142
- Views 115
- Downloads 0
Кусково-лінійна апроксимація потенціальних рельєфів броунівських моторів
Зроблено короткий огляд кусково-лінійної апроксимації потенціальних рельєфів реально існуючих і модельних нанопристроїв (броунівських моторів), що випрямляють хаотичний броунівський рух в системах з порушеною дзеркальною...
Laser-induced phase transition and ablation on the surface of solids (Review)
Phase transitions to be the basis of wide circle of processes of change of composition, structure and properties of materials flowing of that in time is determined by kinetics of transfer of warmth and mass in solids. By...
Синтез і властивості метал-вуглецевих нанокомпозитів Ni/C, Co/C ТА Cu/C з підвищенним вмістом металу
Послідовним двохстадійним методом, що включає механохімічну обробку поліетиленгліколю і ацетатів міді, нікелю та кобальту, з подальшим піролізом отриманої суміші в струмі аргону при 700 °С, синтезовано нанокомпозити Cu/C...
Состояние воды, адсорбированной поверхностью частиц янтаря и его композитной системой с нанокремнеземом, по данным ЯМР-спектроскопии
Методом низкотемпературной 1Н ЯМР спектроскопии изучено состояние воды в гидратированном порошке янтаря и композитной системы янтарь/SiO2 при их соотношении 1:9. Показано, что процесс газификации янтаря в составе компози...
Synthesis and properties of metal-carbon nanocomposites Ni/C, Co/C AND Cu/C with high metal content
Cu/C, Ni/C and Co/C nanocomposites with average size of crystallites of 50, 18, and 20 nm, respectively, have been synthesized, using two-step method, which includes mechanochemical treatment of polyethylene glycol...