Meteorological data in the simulation of combined system work conditions
Journal Title: Civil and Environmental Engineering Reports - Year 2011, Vol 1, Issue 7
Abstract
In the paper results of combined system work simulation basing on rainfall data were shown. Rainfall height values were read for three time interval precisions: 10, 30 and 60 minutes. The last event corresponds with precision gained when using pluviographical specification. Simulation was realised for a calibrated catchment in Głogów. Obtained results point at possibility of significant differences gained when the simulation process is realized with data read directly from pluviographical recording in comparison with pluviographical specification usage. Reading with too low precision decreasing rainfall intensity differences in time could be also a reason why similarity of simulation results and direct reading is low. Such data application in calibration process could lead to parameters which could be rejected in verification of calibrated model.<br/><br/>
Authors and Affiliations
J. Wira, I. Nowogoński, E. Ogiołda
Keywords
Related Articles
- EP ID EP346889
- DOI -
- Views 87
- Downloads 0
SELECTED TRACE ELEMENT CONCENTRATIONS IN PEAT USED FOR COSMETIC PRODUCTION – A CASE STUDY FROM SOUTHERN POLAND
The aim of the study was to assess the concentration of selected trace elements in organic soils used as a source to obtain a unique peat extract for cosmetics production. Peat material for laboratory analysis were colle...
24-HOURS VARIATION OF AMOUNT AND CONTENTS OF WASTEWATER FLOWING TO TREATMENT PLANT IN ZIELONA GÓRA
The article describes daily variations of influents in the aspect of their volume and composition in the sewage treatment plant of Zielona Gora. With a method of direct measurements the flow rate and the concentration of...
NUMERICAL ANALYSIS OF STEEL-REINFORCED CONCRETE COMPOSITE GIRDERS
The article presents a numerical model of a typical composite girder which consists of a strip of a reinforced concrete slab resting on a steel beam. Compatibility of horizontal displacements is assumed in the slab-beam...
TESTS OF A REINFORCED CONCRETE FRAME BEAM SUBJECTED TO SEISMIC-TYPE LOADING
The experimental results from reversed cyclic loading tests on twelve exterior reinforced concrete beam-column joints are presented. The primary variables were the ratio of positive to negative reinforcement and the stir...
Permeability, tortuosity, and attenuation of waves in porous materials
The paper contains a consistent presentation of the construction of a linear poroelastic model and its applications in the theory of acoustic waves. The main purpose of this presentation is the discussion of material par...