Method and Procedure for Checking the Accuracy of the Scan-Indexing System of the NDTUT Equipment for Immersion Technique
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 1
Abstract
This paper deals with the proposal of a method and procedure to verify the accuracy of the scanning-indexing system of the NDT-UT facility for immersion technique, using comparison with a plate of aluminum alloy plate, processed as a test plate.
Authors and Affiliations
Alexandru GIURA, Petrişor GAGIU, Raul NOVAC
Keywords
Related Articles
- EP ID EP629269
- DOI -
- Views 66
- Downloads 0
Research on the Corrosion Resistance, in Saline Solution, of Steel Sheets for Industrial Construction, by Gravimetric Method
In this paper, it was presented a study on corrosion in saline medium, by gravimetric method, of the steel sheets for industrial construction. The corrosion rate was estimated by gravimetric method and evaluate based on...
ZnO Nanoparticles: Green Synthesis, Properties and Applications
In this paper, a review, there are presented “Green” routes used in the synthesis of ZnO nanoparticles because they are more eco-friendly alternatives in comparison with chemical and/or physical techniques. Microorganism...
Effect of Mean Diameter Size of Disperse Phase on Morphology and Corrosion Resistance of Phenol – Formaldehyde Resin/Zn Coatings
The present work has the purpose of obtaining composite coatings using phenol – formaldehyde (PF) resin electrodeposited with zinc. The phenol – formaldehyde resin/Zn coatings were electrodeposited from a suspension of P...
Some Issues Concerning Gear Wheels Fabrication by Sintering
Powder metallurgy appeared in the XVIII century as result of industrial market demand for electric bulbs filaments made of wolfram. Nowadays powder metallurgy is applied in such fields as: automotive industry (cylindrica...
Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the...