METHOD AND SOME RESULTS OF INVESTIGATION OF STRUCTURE-BORNE NOISE OF DIESEL ENGINE AT ACCELERATION MODE
Journal Title: Mobility and Vehicle Mechanics - Year 2018, Vol 44, Issue 2
Abstract
A vehicle engine operates most time at transient modes. Therefore the problem of engine noise investigation in real-life operation conditions is important. The paper presents a method and results of calculation of the engine structure-borne noise at transient operation mode using the components of the IC Engines Single Informational Environment. Investigation of the noise of the V8 120/120 mm diesel engine at the acceleration mode was carried out. The transient mode was presented as an ensemble of steady modes for which the working cycle was calculated and noise calculation was carried out successively. Finally the engine acceleration performance was formed. Analysis of the investigation results demonstrated that at the acceleration mode, the diesel engine noise was by 1.5-2.0 dBA higher than at the similar engine speeds at stationary conditions. It was determined that the basic factors which cause the difference in the diesel engine acoustic performances at the acceleration mode were the injection start angle, ignition delay period, thermal inertia of engine parts and some others. Consequently the pressure rise rate in the cylinder increases which causes the engine noise growth. The approach presented in the paper enables to forecast the engine acoustic performance during its development and perfection.
Authors and Affiliations
Igor V. Alekseev, Mikhail G. Shatrov, Andrey L. Yakovenko
Keywords
Related Articles
- EP ID EP539792
- DOI 10.24874/mvm.2018.44.02.03
- Views 98
- Downloads 0
GUIDELINES FOR CERTIFICATION AND INSPECTION OF VEHICLES ON NATURAL GAS IN THE REPUBLIC OF SERBIA AND ISSUING OF CERTIFICATE
Natural gas and liquefied petroleum gas represent the most practical, realistic and easiest way to reduce pollution coming from road transportation. In practice, natural gas vehicles are as safe as any other vehicles (ga...
CURRENT STATE AND DEVELOPMENT TRENDS IN THE FIELD OF LARGE DIESEL AND GAS ENGINES
Large Diesel and gas engines with power higher than approximately 1 MW play a major role in the sea and land transport of people and goods, but also in the production of electrical energy in remote areas, for peak load b...
AUTOMOTIVE SAFETY CONTROL SYSTEM BASED ON TIMEAXIS DESIGN
Timeaxis design is a design concept that incorporates the concept of time axis into design theory and methodology. Under this design framework, different methods, such as models those who integrate multiple timescales, t...
ANALYSIS OF THE INFLUENCE OF INTERNAL RADIAL CLEARANCE ON THE LOAD DISTRIBUTION OF THE ROLLING BALL BEARING
The distribution of the external radial load on rolling bodies of bearing is uneven. This is a statically undefined problem, so for the analysis of load distribution beside equilibrium conditions need to be introduced an...
HYDROGEN AS A VEHICLE FUEL
Limited oil reserves and the ecological consequences of its use in motor vehicles impose an increasing need for alternative energy and drives. The use of hydrogen as the fuel of the future is one of the solutions whose c...