METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 4
Abstract
Purpose. An electric general-purpose drive with asynchronous motor is proposed. For motor control in stator and rotor, circuits used resistors and thyristors. These elements included together in various ways. This allows to get a variety of power converter circuit with resistor-thyristor modules. Methodology. Taking into account the technical requirements for industrial machinery developed an analytical method for determining the run-up controlled induction motor. Formed starting modes by changing the value of the equivalent resistor-thyristor modules. Using logic synthesis and function of thyristors switching to determine the equivalent value of resistor-thyristor modules. Scientific novelty. It lies in the fact that the proposed method of calculation to determine the run-up in the limited amount of transient current and torque of the motor. The total moment of inertia and the static moment of the drive do not have a significant impact on the maximum value of the transient electromagnetic torque. Most of these options affect the transition process, the oscillation frequency of the electromagnetic torque and the motor speed. Practical value. The method used for calculating allows to select the simplest laws of launch control actuator and apply open-loop control system without increasing the cost of the power converter, so it is of practical importance.
Authors and Affiliations
V. I. Lobov, K. V. Lobova
Keywords
Related Articles
- EP ID EP301293
- DOI 10.20998/2074-272X.2015.4.07
- Views 62
- Downloads 0
CALCULATION METHOD OF ELECTRIC POWER LINES MAGNETIC FIELD STRENGTH BASED ON CYLINDRICAL SPATIAL HARMONICS
Purpose. Simplification of accounting ratio to determine the magnetic field strength of electric power lines, and assessment of their environmental safety. Methodology. Description of the transmission lines of the magnet...
ANALYSIS OF THE OPERATION PECULIARITIES OF THE SUPERCONDUCTING INDUCTIVE CURRENT LIMITER WITH ADDITIONAL SUPERCONDUCTING SCREEN
Purpose. The inductances of magnetic system of a current limiter for the nominal operating mode were determined. The aspects of functioning and a design of a superconducting short-circuit current limiter of inductive typ...
CONTACT POTENTIAL DIFFERENCE AS A MEASURE OF POWER CABLE POLYMER INSULATION AGING
The paper shows dynamics of changing contact potential difference in power cables with cross-linked polyethylene insulation in the initial state and after additional thermal-radiation aging. The cable metal elements grou...
RELAXATIONS LOSSES IN POLYETHYLENE INSULATION OF COAXIAL CABLE STRUCTURE DURING AGING IN HIGH HUMIDITY CONDITIONS
Introduction. The presence of free moisture in power cables leading to the formation of tree structures - water treeing, which originate in the amorphous phase polyethylene and are a major cause of degradation of the pol...
ELECTROMAGNETIC FIELD OF A CABLE WITH A TWO-LAYER SHIELD
The paper presents electromagnetic field calculations for a coaxial cable with a double-layer shield. To describe the conductivity and permeability, discontinuous functions are applied, which makes it possible to solve t...