Microstrip band-pass filter based on resonators with quarter-wave coupling

Abstract

The synthesis procedure of the microstrip band-pass filter based on resonators with quarter-wave coupling is considered. The nonuniform microstrip line electromagnetic field complexity demands using of some mathematical models with the stepby-step field specificity taking into account, when the previous model calculations results become the initial data for the next model. The component coupling increases and new type wave modes appear when the frequency rises and the filter dimensions decrease. According to the concerned procedure: the filter in the 11 GHz band was designed (synthesized and made), the filter in the 26 GHz band was synthesized.

Authors and Affiliations

V. Shkapa, B. Kotserzhynskyi

Keywords

Related Articles

Matched filtering: classical linear and normal filters

Distinctions and interconnection of classical linear and normal filtering are researched at application of these methods to the task of classification.

Modern devices of optimum filtration for the active radar system

The principle of construction the matched filter and correlator, for the active radar system operating with a broadband noise signal is esteemed. The example of construction a сhan-nel of processing on the basis of micro...

Comparative Analysis of the Highimpedance Crystallike Ingomogenities Effectiveness

Introduction. The actuality of the highefficient crystallike ingomogenities development is shown. Traditional microstrip (MS) and electromagnetic (EC) ingomogenities. Comparative effectiveness analysis of the traditional...

Impedance models of double well structures

Introduction. In this paper the impedance models double well structures (DWS) which is based on δ-inhomogeneities and rectangular potential are developed. The models of double well potential which is based on δ-functions...

The main characteristics of SiGe HBTs at low temperatures

The current-voltage curves (CVC) of n-p-n SiGe heterojunction bipolar transistors (HBT) are considered within the temperature range from minus -195˚С up to 25˚С, produced on the SGB25V technology of IHP. The experimental...

Download PDF file
  • EP ID EP309379
  • DOI 10.20535/RADAP.2011.44.68-75
  • Views 61
  • Downloads 0

How To Cite

V. Shkapa, B. Kotserzhynskyi (2011). Microstrip band-pass filter based on resonators with quarter-wave coupling. Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування, 0(44), 68-75. https://europub.co.uk/articles/-A-309379