Modal and Harmonic Analysis of a Cantilver Beam with Differrent Cross-Sections
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Modal analysis helps to determine the system frequencies and to obtain the eigen modes of various structural members subjected to vibration. In this research, modal analysis and harmonic analysis of a cantilever beam with different sections of same weight and material i.e., rectangle, T-section and I-section are carried out using ANSYS software to see the mode shapes and to observe the dynamic response of the cantilever beam and to identify the best configuration of the beam.
Authors and Affiliations
SUDHAKARA REDDY KALAVAPALLI, T. N. RAVI KANTH, K RAJA SEKHAR REDDY
Keywords
Related Articles
- EP ID EP279607
- DOI 10.24247/ijmperdfeb201837
- Views 84
- Downloads 0
Experimental Analysis of Friction Stir Welding of Dissimilar Alloys AA7075 and MG ZE42 Using Butt Joint Geometry
The Aluminium alloy 7075 and Magnesium alloy ZE42 plates of 6 mm thickness are welded in the circular butt joint division by friction stir welding (FSW) process, utilizing vertical processing machine. Method parameters,...
Design and Analysis of Wheel Hub for Student Formula Car
In the current outline of Wheel centre point utilized for Student equation autos, the brake plates can't be evacuated effortlessly since the circle is mounted in the middle of the knuckle and centre. If there should be a...
Fast Timing in Detectors of Ionizing Emission to Identifying Fabrics as a Possibility of Non-linear Optical Phenomen
50–70 ps restrict the time determination of the finders right now being used because of the unconstrained procedures required in the improvement of the reaction signal, which frames after the unwinding of bearers created...
An Optimisation of Spray and Performance Emission Characteristic of Biodiesel and its Blends by Varying Injection Timing in Diesel Engine
The main objective is to optimize the various parameters of spray for different blends of biodiesel and Injection pressure mainly with respect to Spray tip penetration Spray cone angle and Sauter Mean Diameter (SMD), usi...
Parametric Analysis of a Concentrated Solar Receiver with Scheffler Reflector
In this work, the effect of various parameters on the thermal performance and heat losses from the concentrated solar receiver is studied parametrically. A parabolic dish solar concentrating collector is used to heat the...