Modeling of electromechanical systems
Journal Title: Електромагнітна сумісність та безпека на залізничному транспорті - Year 2018, Vol 1, Issue 16
Abstract
Real time systems mode and transmit data on the instantaneous state of the control objects can timely detect any faults and thus provide additional time for their correction by railway em-ployees. Turnouts are one of the most important and responsible components, and therefore re-quire the development and implementation of such diagnostics system. Achieving the goal of monitoring and control of railway automation objects in real time is possible only with the use of an automated process of the objects state diagnosing. For this we need to know the diagnostic features of a control object, which determine its state at any given time. The most rational way of remote diagnostics is the shape and current spectrum analysis that flows in the power circuits of railway automatics. Turnouts include electric motors, which are powered by electric circuits, and the shape of the current curve depends on both the condition of the electric motor, and the conditions of the turnout maintenance. For the research and analysis of AC electric point motor it was developed its mathematical model which satisfies the conditions of adequacy. The calculation of parameters and interdependencies between the main factors affecting the operation of the asynchronous machine was conducted. The results of the model operation in the form of time dependences of the waveform curves of current on the load on engine shaft were obtained. On the basis of the constructed model we can study the AC motor in various mode of operation, record and analyze current curve, as a response to various changes of the load on engine shaft.
Authors and Affiliations
S. Y. Buriak, V. I. Havryliuk, O. Hololobova
Keywords
Related Articles
- EP ID EP618545
- DOI 10.15802/ecsrt2018/172601
- Views 90
- Downloads 0
Comparative analysis of experimental and calculation methods for determination of the traction current harmonics distribution in rails
The purpose of this work is to perform the comparative analysis of experimental and calcula-tion methods for determination of the distribution of traction current harmonics in rails. To in-vestigate the distribution of t...
Emulation of the work of the ABS position of the pulse-wired automatic block signalling of a DC
The principle of automatic block signaling simulation using the example of a pulse-wire DC blocking is presented. A simulation of the logical connections of the signal indications of traffic light and their adaptation fo...
Analysis of failures of railway automatics elements
Relevance. The questions of functional reliability efficiency increase maintenance railway automatics system are considered in the article. This is an important scientific and technical task, the solution of which will i...
Mathematical simulation of transient processes in the setting of cylinder magnets’ demagnetization
In this article the temporal dependences of magnetic intensity in a cylindrical pattern of mag-netic material during its impulse demagnetization and capacitor’s voltage are carried out by the mathematical simulation.
Parameters and Technology of Experimental Blasts during Drilling of the Left Running Tunnel of the Metro in the City of Dnipro
The problems of effective application of drilling and blasting operations during three experi-mental blasts in the Dnipropetrovsk subway tunnel are considered. The necessity of combined application of short-delay and del...