Modeling of environmental aspects related to reverse osmosis desalination supply chain
Journal Title: Environmental Health Engineering and Management Journal - Year 2020, Vol 7, Issue 1
Abstract
Background: This study aimed to model optimization of strategic environmental management decisions in the operation of reverse osmosis desalination, emphasizing the costs required for the environmental protection during the production of freshwater using reverse osmosis technology. Methods: This analytical research was conducted in five cities of Hormozgan province in Iran for 18 months from February 2018 to September 2019. The research includes eight phases of defining the research problem, data collection, preliminary data analysis and decision criteria, mathematical modeling, model validation, information preparation, analysis and finally discussion, conclusions and suggestions. The main environmental issues were the carbon dioxide (CO2) release rate due to power demand and rejected brine water (RBW) were entered the mathematical model. Results: The desalination plants of Abu Musa, Bandar Abbas, Qeshm, Sirik, and Hormoz with water production flow rate of 2100, 89 000, 5300, 3300 and 1500 m3/d can generate 2360.82, 100053.80, 5958.260, 3709.86 and 1686.30 tons/year of CO2 emissions respectively. This output requires 1.35, 57.47, 3.42, 2.13 and 0.97 million USD for controlling the process, respectively. For reduction of the negative effect of RBW 0.75, 22.79, 1.78, 1.15 and 0.55 million USD respectively, is needed. Conclusion: Recommendations for environmental impacts protection of RBW, for desalination capacity up to 50 000 m3/d, are; (a) for desalination capacity up to 50 000 m3/d; dilution the RBW using raw water before entering into the sea, (b) for capacity of 50 000-100 000 m3/d; dispersing RBW in sea using diffuser, and (c) for capacity more than 100 000 m3/d; hybrid water desalination plants and power plant. Application of power plant cooling water to dilute RBW may reduce cost.
Authors and Affiliations
Mohammad Reza Mehrgan, Hannan Amoozad Mahdiraji , Shahab Binaee , Vali Alipour , Seyyed Hossein Razavi Haji Agha
Keywords
Related Articles
- EP ID EP678621
- DOI 10.34172/EHEM.2020.05
- Views 203
- Downloads 0
Evaluation and spatial noise mapping using geographical information system (GIS): A case study in Zaria city, Kaduna State, Nigeria
Background: Spatial noise level mapping using a geographical information system (GIS) is essential for the visual colour representation of noise analysis, which is a necessity for strategic planning and mitigating meas...
Effects of pistachio processing wastewater on treatment efficiency of urban wastewater using activated sludge process
Background: In this study, the effect of wastewater produced by pistachio processing in processing terminals on wastewater treatment plants with activated sludge process was investigated. Methods: The pilot of activated...
Health risk assessment of heavy metal exposure from indoor dust: A case study of residential buildings in Isfahan, Iran
Background: Heavy metals (HMs) are toxic pollutants whose concentrations in confined spaces might cause severe health impacts. This study aimed to determine the concentration and health risk of As, Cd, Co, Pb, Mn, Ni,...
Concentration of cadmium, arsenic, and lead in rice (Oryza sativa) and probabilistic health risk assessment: A case study in Hormozgan province, Iran
Background: The presence of toxic heavy metals in cereal grains like rice is one of the main human and environmental health concerns. Their importance is because of their non-biodegradability nature, high half-time, an...
Assessment of aflatoxin exposure using urine biomarker in pregnant and non-pregnant women in Yazd, Center of Iran
Background: Aflatoxins (AFs) are one of the most prevalent toxins, which long-term exposure to them could be a risk factor for liver cancer. AFM1 is the hydroxylated metabolite of AFB1, therefore, the presence of AFM1 in...