MODELING OF TEMPERATURE FIELD DISTRIBUTION OF THE FOAM GLASS BATCH IN TERMS OF THERMAL TREATMENT OF FOAM GLASS
Journal Title: International Journal for Computational Civil and Structural Engineering - Year 2017, Vol 13, Issue 3
Abstract
Applications of foam glass is currently quite wide. This material is applied directly to construction and other human activities. Recent years the attention of scientists aimed at modeling the thermal processes in the production of foamed glass. Appear works in which the developed mathematical model allows to predict the distribution of temperature fields in the foam glass material at various stages of heat treatment of the material. The emergence of these models reveals a number of promising directions in the improvement of technology of producing foamed glass. Within the phenomenological formulation of the problem it is necessary to consider three-dimensional temperature field in the charge of foam-glass and inside the metal mold for foaming. It is necessary to consider the nonstationarity of the process and dynamics of change in macrovisiontm values. It is also worth noting that in the conditions of heat treatment of charge materials occurs difficult the heat transfer. The distribution of temperature fields in the foam glass material is from near-surface regions of the charge to the center. The first objective of the study is to find and describe the distribution of temperature fields in the volume of the foam glass of the charge to reflect changes in microphysically parameters in foam glass batch due to the gradual formation of porosity of the material of the charge from the periphery to the center. The second task is to find conditions for the uniform formation of the pore volume of the material. The paper presents a boundaryvalue problem of heat transfer in foam glass material for the metal mold on the x coordinate. This illustration of temperature field distribution inside the metal mold for foaming.
Authors and Affiliations
Sergey V. Fedosov, Maksim O. Bakanov
Keywords
Related Articles
- EP ID EP576896
- DOI 10.22337/1524-5845-2017-13-3-112-118
- Views 34
- Downloads 0
INVESTIGATION OF HEAT-HUMIDITY TRANSFER IN HIGH-POROUS GAS-FILLED POLYMERS TO CALCULATE ITS HEAT CONDUCTIVITY
A method for calculating the effective thermal conductivity of moisture-containing highly porous foamed polymers is proposed. In this method a non-additive scheme for taking into account the effect of steam diffusion on...
BOLTS PULLING TEST. REVERSER FOR BOLTS TESTING
The article describes developed device for performing pulling tests of bolts, including high-strength. Principle of reverser operation is change of sign of applied load – compression of press causes stretching of a bolt....
TO THE ASSESSMENT OF VERTICAL CRANE LOAD
The problems of analytical and statistical modeling of the travelling cranes loads are carried out in the paper. The analytical model was expanded by the consideration of influence of the approach of cranes trolley, cons...
INELASTIC ANALYSIS OF REINFORCED CONCRETE STRUCTURES IN SCAD
This paper describes the approach implemented in SCAD for the analysis of behavior of fragments of thin-walled reinforced concrete structures taking into account the elastic-plastic behavior of both concrete and reinforc...
КОНЕЧНОЭЛЕМЕНТНОЕ МОДЕЛИРОВАНИЕ ВЫГИБА ПРЕДНАПРЯЖЕННЫХ ЖЕЛЕЗОБЕТОННЫХ БАЛОК
For large-span reinforced concrete beam structures developed by the method of determining the camber due to the prestressing of a steel rope on the concrete. Performed numerical experiments to study the impact of various...