MODELING OF TEMPERATURE FIELDS IN A SOLID HEAT ACCUMULLATORS
Journal Title: Наука та прогрес транспорту - Year 2016, Vol 0, Issue 5
Abstract
Purpose. Currently, one of the priorities of energy conservation is a cost savings for heating in commercial and residential buildings by the stored thermal energy during the night and its return in the daytime. Economic effect is achieved due to the difference in tariffs for the cost of electricity in the daytime and at night. One of the most common types of devices that allow accumulating and giving the resulting heat are solid heat accumulators. The main purpose of the work: 1) software development for the calculation of the temperature field of a flat solid heat accumulator, working due to the heat energy accumulation in the volume of thermal storage material without phase transition; 2) determination the temperature distribution in its volumes at convective heat transfer. Methodology. To achieve the study objectives a heat transfer theory and Laplace integral transform were used. On its base the problems of determining the temperature fields in the channels of heat accumulators, having different cross-sectional shapes were solved. Findings. Authors have developed the method of calculation and obtained solutions for the determination of temperature fields in channels of the solid heat accumulator in conditions of convective heat transfer. Temperature fields over length and thickness of channels were investigated. Experimental studies on physical models and industrial equipment were conducted. Originality. For the first time the technique of calculating the temperature field in the channels of different cross-section for the solid heat accumulator in the charging and discharging modes was proposed. The calculation results are confirmed by experimental research. Practical value. The proposed technique is used in the design of solid heat accumulators of different power as well as full-scale production of them was organized.
Authors and Affiliations
S. S. Belimenko, V. O. Ishchenko
Keywords
Related Articles
- EP ID EP226248
- DOI 10.15802/stp2016/83406
- Views 104
- Downloads 0
INTERACTION OF SOIL-CEMENT PILE SUPPORTING STRUCTURES WITH THE BODY OF A LANDSLIDE
Purpose. Analysis and comparison of the landslide slope finite element model calculation results of the appliance of soil-cement piles, depending on the variation of the retaining structure rigidity, makes it possible to...
SELECTION OF RATIONAL PARAMETERS OF THE NOMINAL MODE ELECTRIC TRAINS WITH ASYNCHRONOUS TRACTION DRIVE
Purpose. Parameters of the nominal mode are related to the most important performance indicators of traction means, therefore, the problems of choosing their optimal values always inevitably arise when forming technical...
INFLUENCE OF CONTACTOR CONTACT PRESSURE IN POWER CIRCUITS OF ELECTRIC STOCK ON THEIR PLASTIC DEFORMATION AND FUSING
Purpose. The work is aimed at conducting the study to obtain the results that will quantify the influence of contactor contact pressure in power circuits of electric stock on the highest current value Id, that does not c...
ОЦІНКА РІВНЯ ВІДПОВІДНОСТІ ЛОКОМОТИВОРЕМОНТНОГО ВИРОБНИЦТВА
Мета. Перевірки та обстеження технічного рівня локомотиворемонтних виробництв залізниць проводяться представниками керівного складу Департаменту та служби локомотивного господарства, ревізорського апарату, експертними гр...
COMPOSITE IMPULSED-PLASMA COATING «STEEL T1/CAST IRON CR28MN3»
Purpose. The article is aimed to investigate the structure of the composite coating obtained by pulse-plasma treatment using cathodes of high-carbon material with higher amount of carbide-forming elements. Methodology. T...