Modeling of the Material Flow at the ECAE Process Using the Current Lines Method
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 4
Abstract
The Equal Channel Angular Extrusion is an important method of Sever Plastic Deformation, applied in aim the obtaining of nanostructured metallic materials. The cinematic field of the material may be described with various calculus methods. In this paper is developed a study of the flow field using the current lines theory.
Authors and Affiliations
Nicolae CĂNĂNĂU
Keywords
Related Articles
- EP ID EP630265
- DOI -
- Views 82
- Downloads 0
The Correlation Between Mechanical Characteristics and Technological Parameters in Heat Treatments Applied to Moulding Aluminium Like ATSi5Cu1
The paper contains an experimental study of colligating the technological parameters of the artificial aging operation namely time and soaking temperature with hardness and mechanical strength properties gained after the...
Metallic Matrix Composites with Ceramic Particles. Wetting Conditions
The paper presents the main aspects regarding the mixtures obtained made up from aluminium melts and different kinds of ceramic particles (silicon carbide and boron carbide). Synthetically discussed are the wetting condi...
Surface Tension of Liquid Copper in Dilute Oxygen Concentrations
The studies of this paper regarding the influence of low oxygen contents on the liquid copper surface tension had as base „sessile drop” method and the determination of the oxygen content using calculation ratio where pa...
Microstructural Evolution of Al 1100 Aluminum Subjected to Severe Plastic Deformation
The goal of this document is to promote a sequence of bulk-deformation processes able to produce ultrafine grain and also nanostructured wires with adequate length to be interesting for processing in metallurgical indust...
Silica thin Films Obtaining by Sol – Gel Dip Coating with Controlled Optical Properties
Transparent oxide films are widely employed as antireflection or high reflection coatings, band-pass filters and narrow-band-filters in various optical and electronic devices. The performances of these devices are based...