Modelling of the Flow and Deformation Fields at the Profiles Rolling by Field Lines Method
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 2
Abstract
This paper presents a method for modeling of the rolling process based at the deformable continuous medium mechanics, the theory of field lines. The rolling of the profiles and plates may be evaluated as the plane strain state process. Using the equations of the continuous medium and the initial conditions and the limits conditions we solved the speed field, the strain rate field, the strain field. Applying an adequate computation program we obtained the values of the field factors of modeling process. The results are showed into this paper.
Authors and Affiliations
Nicolae CĂNĂNĂU, Ionel PETREA, Gheorghe COROBETE
Keywords
Related Articles
- EP ID EP664236
- DOI -
- Views 83
- Downloads 0
Nanocomposite Coatings Obtained by Electro-Co-Deposition of Inert Particles with Cobalt–a Review
The paper focuses on review investigations of electrodeposition processes of metallic coatings containing dispersed nanosized particles. The nanosized particles, suspended in the electrolyte by agitation and/or use of su...
Some Aspects about the Refractory Lining Wear in Furnaces
For melting cast iron, carbon steel, copper and copper alloys the quartzite is still one of the most used lining material and the most cost effective as well. The silica lining has to be replaced frequently due to the we...
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...
Automated Apparatus-Program System for Evaluating the Strength of a Reducer Shaft
The paper deals with a design of automated system for studying the strength of a reducer shaft according to the probabilistic evaluation method concerning the examination of machine elements. The apparatus-program system...
Corrosion Behaviour and Biocompatibility of 316 Stainless Steel as Biomaterial in Physiological Environment
Although stainless steel is a material widely used for biomedical applications, its surface properties for long term application are still a serious concern. 316L stainless steel (SS 316L) is a material commonly used in...