Modification of steel 35 HL surge current during crystallization
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 79, Issue 1
Abstract
The method of electro steel melt modification 35 HL variable polarity current pulses with a duration of more 10-3s frequency within the 5–33 Hz, 5–24 porosity meanders, strength 30–40 A at a voltage of 180–240 V during crystallization, which allows to obtain high-quality castings 35 HL steel grade. Show that electro melt processing improves the structure and reduces the physical heterogeneity of castings and increases the rate of dissolution of metallic impurities and other components in the melt, providing fine-grained structure and increases the homogeneity of metal carbides reduces the amount of manganese reduces gases and nonmetallic inclusions. Modifying steel 35 HL pulse current during crystallization of the melt increases the physical and mechanical properties of tempered steel, increasing yield strength by 30 %, the tensile strength at 7 % elongation of 1,5 % relative narrowing by 2 %, toughness at 20 %.
Authors and Affiliations
O. M. Zhbanova, L. N. Saithareiev, H. A. Bialik, I. E. Skidin
Interaction of energy-material flows in gas-liquid environments
The article deals with the features of the flow of energy-material transformations in sugar-containing environments of anaerobic fermentation. Endogenous processes - the synthesis of carbon dioxide, the synthesis of ethy...
Substantiation of enterprises’ personnel potential characteristics
Globalization and innovation processes, which cover all the spheres of society, change the conditions for human administration in socioeconomic processes, actualizing the researches in the field of substantiation of crit...
Study of ultrasonic exposure effect on retaining ability of diesel fuel in ammonium nitrate
The economic situation in Ukraine depends to a large extent on the mining and metallurgical complex, and therefore the introduction of safe and effective explosives for mining of minerals through the abandonment of TNT a...
Renewable diesel fuel and FT-fuel as alternative to diesel fuel
Biodiesel or biodiesel fuel is the most commonly used diesel alternative fuel. The high viscosity of biodiesel and the increase in nitrogen oxide emissions in comparison with diesel fuel restrict its use in diesel engine...
Stand for investigation of the characteristics of screw downloaders
To improve the working conditions of screw loaders with different trajectories of moving bulk materials, the following should be implemented: existing screw loaders with the transfer of bulk materials from below to the t...