Modifying the Structure and Surface Properties of Ti6Al4V Alloy by Carbonitriding in Fluidized Bed
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 2
Abstract
The Ti6Al4V alloy is known as being one of the most widely used biocompatible alloys and not only that. The study is based on experienced research of the hardening in a fluidized bed and applied to samples of Ti6A14 in laboratory conditions. The carbonitriding has been accomplished on an exterior electric heating reactor. It has been examined the influence of the heat and the duration of the thermochemical treatment out of economy interests, the flow has been made with a mix of CH4 and NH3 (5% concentration). The results have been examined through hardness (HV5), metallographic microstructures and micro hardness in section (micro HV).
Authors and Affiliations
Nelu CAZACU
Keywords
Related Articles
- EP ID EP597753
- DOI -
- Views 62
- Downloads 0
Mass Erosion and Material Transfer at the Deposition of Layers by Inverse Electroerosion
The deposition and alloying of the superficial layers by inverse electroerosion or by electric spark given by a vibrating electrode permits to obtain a large scale of properties at the surface of metallic materials from...
Fabrication of Ultrafine Low Carbon Metallic Multilayer by Accumulative Roll Bonding
The effect of grain refinements by Accumulative Roll Bonding (ARB) was investigated on low carbon steel. Optical microscopy (OM) and microhardness tests were used to check the phase changes and hardness before and after...
Hydrogen Production by Steam Reforming of Renewable Raw Materials
The paper is based on study of steam reforming of renewable raw materials (bioethanol, biomethane) in stainless steel fixed bed reactor. The β-alumina catalysts with nickel has been synthesized and tested supported. The...
The Structural Optimizing of Metallurgical Installations and Mechanisms
The structural optimizing of used mechanisms in the machines construction and metallurgy through the further liberty degrees creation is essential projection problem, as it enters the closing mechanisms case with sliding...
Air Pollution Control
Air pollution is an important issue nowadays, and combustion plants have a significant contribution in this regard. In this paper we are going to present some of the techniques that can be used to avoid creating pollutan...