МОЖЛИВІСТЬ ВИЯВЛЕННЯ ПОТЕНЦІЙНО НЕНАДІЙНИХ ЕЛЕМЕНТІВ ЕЛЕКТРОНІКИ
Journal Title: Вимірювальна техніка та метрологія - Year 2018, Vol 79, Issue 3
Abstract
Hidden defects can turn into obvious defects and characteristics of electronic elements become inappropriate. Therefore, the techniques of non-destructive diagnostics of inner structure state are of great importance. One of these techniques is the diagnostics of electronics by their own noise, which advantageously differs by low time consuming and absence of the risk of damage of the element under investigation. Noise measurements are capable to detect the defects in a material with a sensitivity that cannot be reached by other methods. The results of computer simulation of noise for different models of its internal structure are presented. The simulation was carried out in order to reveal the influence of the internal structure elements of the system under study on the level of its noise at low frequency range. It is shown that systems with fewer structural elements have lower noise level at low frequencies concerning the systems that comprise more elements. The results of the simulation also demonstrate that systems with the same number of structure elements are inherent in different noise levels in low frequency range: systems with an ordered arrangement of the elements are the less noisy then more disordered omes. The results of noise studies of metal films, composite resistors and semiconductor diodes at low-frequency range are presented. It is noted that noise of composite resistors at low frequencies is greater than noise of the metal film resistors for the same scattering power (0,125 watts). The noise of the diodes at low frequencies is much larger than the resistors noise. The increase in noise for diodes can be explained within the hypothesis of the substantial influence of the internal structure of the test sample. Analytical expression of the energy spectrum of the own noise of electronic element, which parameter τ depends on the features of the internal structure, is presented. It has been shown that the detection of potentially unreliable elements can be carried out either by the level of their own noise at the low-frequency band or by the value of the parameter τ.
Authors and Affiliations
Zenoviy Kolodiy, Oleh Kruk
Keywords
Related Articles
- EP ID EP533048
- DOI 10.23939/istcmtm2018.03.083
- Views 88
- Downloads 0
ВИЗНАЧЕННЯ ОПТИМАЛЬНОЇ СМУГИ ЧАСТОТ ПІД ЧАС КОРЕЛЯЦІЙНИХ ВИМІРЮВАНЬ ЧАСОВОЇ ЗАТРИМКИ СИГНАЛІВ
Received were the expressions for an estimation of the signal-to-noise ratio on the output of correlation meter. These expressions allow determining the optimum interval of integration and the optimal frequency band for...
АНАЛІЗ ГРАНИЧНИХ УМОВ ПРАЦЕЗДАТНОСТІ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ ІМІТАНСУ НА БАЗІ ОПЕРАЦІЙНИХ ПІДСИЛЮВАЧІВ
Development of specialized portable measurement tools for impedance spectroscopy is quite challenging and up-to-date technical task. Portable impedance analyzers are required to satisfy certain criteria among which the m...
ВПЛИВ НЕВИЗНАЧЕНОСТЕЙ ФІЗИЧНИХ ВЛАСТИВОСТЕЙ ГАЗОПОДІБНИХ ЕНЕРГОНОСІЇВ НА ТОЧНІСТЬ ЇХ ОБЛІКУ
The analysis of the influence of uncertainties of gas physical properties on the uncertainty of the result of flow rate measurement by the method of differential pressure is made. The requirements to the precision of the...
ВПЛИВ ВИПАДКОВИХ ВІДХИЛЕНЬ У РЕЗУЛЬТАТАХ ВИМІРЮВАНЬ НА НЕПЕВНІСТЬ ЕКСТРЕМАЛЬНИХ СПОСТЕРЕЖЕНЬ
In connection with the set requirements for processing measurement results the attention is considered to analysis of instrumental component of result’s uncertainty. While production control in industry...
ДОСЛІДЖЕННЯ ДІЕЛЕКТРИЧНИХ ВЛАСТИВОСТЕЙ РЕЧОВИН У ДІАПАЗОНІ РАДІОЧАСТОТ
At the frequency range up to 100 MHz the real dielectric with permittivity e and conductivity λ simulated by twoterminal element of the electric circuit with complex impedance Z ~ or complex conductivity L ~ , in which i...