MULTI-3D MODELING OF THE LIQUIDUS AND IMMISCIBILITY SURFACES IN THE Cu–Pb–Te SYSTEM

Journal Title: Azerbaijan Chemical Journal - Year 2019, Vol 0, Issue 1

Abstract

Based on thermodynamic calculations and analysis of experimental literature data the fields of the primary crystallization of the phases, the types and coordinates of non- and monovariant equilibria in the Cu–Pb–Te system are determined. It has been revealed that the ternary compound is not formed in the system, and in the solid state it is divided into subsystems with the participation of lead telluride: Cu–PbTe–Pb, Cu–Cu2-xTe–PbTe, Cu2-xTe–Cu5Te3–PbTe, Cu5Te3–Cu4Te3–PbTe, Cu3-xTe2–CuTe–PbTe, CuTe–Te–PbTe. The projection of the liquidus surface Cu–Pb–Te is determined. On the basis of phase diagrams of the boundary binary systems and the limited number of DTA data of the ternary system by using the OriginLab program, equations are obtained for calculating and 3D modeling of the PbTe, CuTe, Cu2-xTe, Cu3-xTe2, and Cu5Te3 crystallization surfaces and the surface of the liquid immiscibility in the Cu–Pb–Te system. There are regions of immiscibility for the liquid phase from the side Cu–Cu2-xTe and Cu–Pb. With an increase quantity of the third component, the critical temperature immiscibility decreases. Defined in the work 3D model for the system Cu–Pb–Te keeps the corresponding analytical function and table data in the form of matrices

Authors and Affiliations

N. Ya. Akhmedova, N. B. Babanly, A. N. Mamedov, Yu. A. Yusibov

Keywords

Related Articles

GLASSFORMATION IN THE SYSTEM As2S3–Pr6O11

Boundaries of glassformation in the system As2S3–Pr6O11 were studied using methods of physico-chemical analysis (X-ray analysis, Raman spectra, Scanning electron microscope). It was established that in glassformation reg...

PURIFICATION OF SULPHATE CONTAINED TECHNOLOGICAL SOLUTIONS FROM ARSENIC BY HYDROLYTIC PRECIPITATION AND RECEIVING OF SELECTIVE Cu, Zn, Co, Mn CONCENTRATES

In the article information is given about tailings which were received from enriching of iron ore irrigated by heap leaching method purification of As by hydrolytic precipitation and receiving selective Cu, Zn, Co, Mn co...

REMOVAL OF Fe(III) IONS USING PHOSPHORUS-CONTAINING SORBENT ON THE BASIS OF BUTADIENE-STYRENE RUBBER

Phosphorus-containing polymeric sorbent on the basis butadiene–styrene rubber was used to remove Fe(III) ions from water. The research was carried out to study the sorption characteristics by determining the effects of v...

SOME FEATURES OF THE REACTION OF MONOCHLORAMINES OF SULPHOACIDS WITH UNSATURATED COMPOUNDS

The reaction of monochloramide of benzene sulphonic acid with allyl chloride was studied. When using aprotic solvents chloro amidation reaction occurs, but with protic solvents ethylenechlorohydrin derivatives are formed...

THE ACTIVITY OF THE ZINC–COBALT OXIDE SYSTEM IN THE REACTION OF ETHANOL STEAM REFORMING

Reaction of ethanol steam reforming to hydrogen over binary zinc–cobalt oxide catalysts of different compositions has been studied. It is found that at low temperatures the reaction products are acetaldehyde and acetone,...

Download PDF file
  • EP ID EP509810
  • DOI 10.32737/0005-2531-2019-1-59-64
  • Views 119
  • Downloads 0

How To Cite

N. Ya. Akhmedova, N. B. Babanly, A. N. Mamedov, Yu. A. Yusibov (2019). MULTI-3D MODELING OF THE LIQUIDUS AND IMMISCIBILITY SURFACES IN THE Cu–Pb–Te SYSTEM. Azerbaijan Chemical Journal, 0(1), 59-64. https://europub.co.uk/articles/-A-509810