Multi Response Optimization of Friction Stir Lap Welding Process Parameters Using Deng’s Similarity Based Method
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 2
Abstract
This study focuses on the effect of process parameters such as Tool rotational speed, Welding speed and Tool tilt angle in Friction stir Lap welding of dissimilar AA 5083 and AA 6082 alloys. Experiments are designed with three different levels of process parameters using Taguchi orthogonal array. As per DOE, experiments are conducted using Taper threaded cylindrical tool which is made up of with H13 tool steel, on Aluminium plates of 3mm thickness. The Tensile shear test specimens are tested at room temperature in order to analyze the mechanical properties. Vicker’s hardness is also conducted to check the hardness of welded zone. Multi response characteristics include hardness, shear strength, elongation percentage and peak load are optimized using a multi criteria decision making approach. The optimum values are found at tool rotational speed of 710 rpm, welding speed of 1.5 mm/min and tool tilt angle of 1 degree.
Authors and Affiliations
Dr. P Hema, P Yamini priya, M Reddeiah
Sway Analysis of Rigid Jointed Portal Frame by Using Simplified Approach Method in Rotation Contribution Method (Kani’s Method)
Analysis of rigid jointed portal frame involves lots of complication and tedious calculation by using displacement factor and conversion factor in Kani’s method. Displacement factor is required in Kani’s method during th...
Review Study of soil behavior mix with waste Plastic
Infrastructure is a major sector that propels overall development of Indian economy. The foundation is very important for any structure and it has to be strong enough to support the entire structure. For foundation to be...
Numerical Modelling of Waterlogging Problem in New Urbanized Communities in Al-Qairawan area, Kuwait
Expanding the urbanization of new communities within the limited low flat desert surfaces of Al-Qairawan area, Kuwait has started to face the continuous growth of population. The traditional urbanized logged areas affect...
Object-Based Crop Mapping Using Multi-Temporal Landsat 8 Imagery
This study aimed to map crop pattern using object-based classification technique within a Mediterranean agricultural land in Turkey. Many Mediterranean land covers show similar spectral characteristics that make it diffi...
Comparison of the GERG-2008 and Peng-Robinson Equations of State for Natural Gas Mixtures
This work compares two equations of state applicable to natural gas mixtures, namely the GERG-2008 equation of state (EoS), which was proposed as a high-accuracy reference model, and the traditional Peng-Robinson (PR) Eo...