Nanocrystalline Hydroxyapatite Ceramics Prepared by Hydrolysis in Polyol Medium, Microstructure and Mechanical Properties after Spark Plasma Sintering
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2014, Vol 6, Issue 3
Abstract
This Letter describes a new approach for the synthesis of hydroxyapatite (HA) nanoparticles by polyol process has been successfully conducted by spark plasma sintering process, resulting in a dense hydroxyapatite compacts. Besides, the sintering behaviour of hydroxyapatite powders at different temperatures ranging from 800°C to 950°C at 50 MPa was studied. The microstructure, Vickers microhardness, fracture toughness and density are described. The suitable sintering condition under the pressure of 50 MPa is 900°C for 5 min. A maximum value of the density was reached at around 900°C, and then decreased with further increase in the temperature due to the decomposition of hydroxyapatite into β-tricalcium phosphates.
Authors and Affiliations
Abderrahmen Mechay, Noureddine Jouini, Fréderic Schoenstein
Keywords
Related Articles
- EP ID EP652614
- DOI 10.24297/jac.v6i3.6594
- Views 145
- Downloads 0
Optimization of Process Parameters in Stir Casting of Hybrid Metal Matrix (LM25/SiC/B4C) Composite Using Taguchi Method
Aluminium based composites exhibit many attractive material properties such as increased stiffness, wear resistance, specific strength and vibration damping and decreased co-efficient of thermal expansion compared with t...
An investigation of Drilling characteristics of Carbon-Carbon composites by Acoustic emission process
Titanium coated tungsten carbide (Ti-WC) drill bit was used for drilling on the carbon-carbon composites laminates. The drilling speed was varied between 1000 to 3000 rpm with different feed rate of the drill. With respe...
STATISTICAL MODEL BASED OPTIMAL PREDICTION ON DRILLING PARAMETERS
The drilling is an imperative machining practice in the mechanical field for fitting or cutting the materials devoid of any disturbance. Various elements are basically employed within the automobile applications on accou...
Synthesis, structure and characterization of a new noncentrosymmetric Zn(II) complex with the 2-amino-5-chloropyridine ligand (AClPy)
A new noncentrosymmetric Zn(II) complex with the monodentate ligand 2-amino-5-chloropyridine (AClPy), ZnCl2(C5H5ClN2)2, has been prepared at room temperature and characterized by single crystal X-ray diffraction, 13C CP-...
Smart grid-Power factor Correction and Maintenance in Consumer Side Using RFID Based Power Line Carrier
Smart grid is a grouping of information and communication technology and intelligent common infrastructure. Talking about smart grid the consumers and suppliers are very much important inorder to manage,monitor and con...