Control circuit of an Electronically Controlled Capacitor for the Optimization of the Single Phase Induction Motor
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2015, Vol 39, Issue 39
Abstract
The control circuit of an Electronically Controlled Capacitor (ECC) for the optimization of the Single Phase Induction Motor (SPIM) with auxiliary winding is presented. The control circuit is based on a fixed value AC capacitor within a full bidirectional switches bridge PWM controlled at much higher than line frequency (in kHz range). The power bridge circuit and its embedded pulse driver circuit are presented within the theoretical sections of the paper. In the experimental section, using a small electric motors test bench and a two speed SPIM with auxiliary winding, are analyzed the main influences of the pulse drive circuit over the ECC. Firstly, being considered that the optimum is reached at the maximum motor torque, the optimal pulses frequency has been established around 4 kHz. Secondly, the switches over-voltages at the ommutations moments being a serious drawback of the ECC, are analyzed the influence of the fixed capacitor value and the dead time of the pulse shape over the MOS-FET power transistors of the bidirectional switches over-voltages. The overvoltages diminish as both the capacitor value and the dead time diminish. More than that, in contrast with some authors, there are no disadvantages as dead time became zero. These issues are the main contributions of this paper.
Authors and Affiliations
Radu Campeanu, Adrian Danila
Technical and Economic Analysis of Thermal Energy Storage in the Biomass CHP Plants with ORC Technology
The investments in units of electricity production from the renewable energy sources have an increasing trend in the European Union countries. The production of elec-tricity from renewable energy sources and cogeneration...
Continuous Monitoring and SCADA Integration of the Sag of Overhead Electricity Transmission Cables Based on the Measurement of their Slope
This paper presents a proposed system for the continuous monitoring of conductor sag values in overhead electricity transmission lines through slope angle measurement, by using a mathematical model based on the catenary...
ENERGETICAL PERFORMANCES OF SINUSOIDAL PWM STRATEGY FOR THE INDUCTION MOTOR AND VOLTAGE INVERTER SYSTEM: SIMULATION AND EXPERIMENTAL APPROACH
The electric drive is a main component of industrial equipment designed for small or large complexity, because the achievement of finished goods implies the adjustable mechanical energy available at the output of the sys...
ELECTROMAGNETIC FIELD DISTRIBUTION IN VICINITY OF POWER LINES ABOVE REAL EARTH
A method for electromagnetic field components calculation in vicinity of power lines is presented. The electromagnetic field distribution of 2x110 kV power line, which is commonly used in Serbian electric power system, i...
VALIDATION OF NUMERICAL INVERSION METHOD FOR LAPLACE TRANSFORM
Currently there are several numerical methods for inverting the Laplace transform (ILT) but not all of them are used in electrical engineering. The main difficulty regarding the electric circuits is, among others, to fin...